Top 10 Shark Corp

Product Description

A Great All Around Saw For Every Toolbox. Cuts All Types Of Wood And Does A Wonderful Job In Pvc And Abs Plastic Pipe. 14 Teeth-Per-Inch Allow Smooth, Fast Cuts. If You Are Only Going To Own One Hand Saw This Is The One You Need For All Of Your Jobs. Not For Cutting Metal. Great For Cutting Dimensional Lumber, Thick Plywood, Wallboard And Treated Lumber Of All Sizes. Carves Through Pvc And Abs Pipe Easily And Smoothly., 14 Tpi Blade.

From the Manufacturer

A great all around saw for every toolbox. Cuts all types of wood and does a wonderful job in PVC and ABS plastic pipe. 14 teeth-per-inch allow smooth, fast cuts. If you are only going to own one hand saw this is the one you need for all of your jobs. Not for cutting metal.

Product Description

Shark grip Nail Pullers Remove Even Embedded, Headless Or Rusted Nails. An Advanced Tempering Method In The Drop Forged Construction Process Of This Nail Puller Gives It Extra Durability To Prevent Chipping Or Bending. 11 In. For Finish Nail (2 In. To 3 In.), Common Nail (2 In. To 3-1/2 In.) And Ring Shank.

From the Manufacturer

SharkGrip Nail pullers removes even embedded, headless or rusted nails. An advanced tempering method in the drop forged construction process of this nail puller gives it extra durability to prevent chipping or bending. 11 in. for Finish Nail (2 in. to 3 in.), common nail (2 in. to 3-1/2 in.) and ring shank.

Product Description

This Pry Bar And Nail Puller Is Made With High-Quality Hardened Steel Alloy And The Thinnest Blade Available On The Market. It Will Pry Into Any Tight Spot With Ease, Doing Less Damage To Wall And Molding Surfaces. The Curve Of The Blade Is Designed To Lift Molding Easily With A Turn And Is So Sharp It Removes Any Nail, Even Very Small And No-Head Nails, Lodged In The Wall Or Any Other Material. Made With Chromium High Carbon Steel And The Thinnest Blade Available. Wide Blade Yields Less Damage. 8″ Long.

From the Manufacturer

This pry bar and nail puller is made with high-quality hardened steel alloy and the thinnest blade available on the market. It will pry into any tight spot with ease, doing less damage to wall and molding surfaces. The curve of the blade is designed to lift molding easily with a turn and is so sharp it removes any nail, even very small and no-head nails, lodged in the wall or any other material.

Product description

With a Contoured design for a strong grip and textured to prevent slippage, Highly powerful saw able to cut sheet rock or gypsum wall board. The RockEater with its stiff, sharply pointed blade, easily plunges through drywall and cement board while its push-to-cut design prevents tearing the drywall paper on the exposed side. Chrome-plated to prevent rust.

Amazon.com

The Rockeater from Shark is an exceptionally fine drywall saw. Designed for the professional, this saw features diamond-ground teeth for fast, smooth cuts, and a comfortable handle with a wrist strap for convenience. This saw will outlast most drywall saws four to one — it can even cut cement board.

This knife has a 6-inch blade with seven teeth per inch, plus a super-sharp punching point and an extra stiff blade. The extremely sharp two-way cutting edge teeth are created to pull and push both ways. This versatile hand tool really is a must for anyone doing remodeling or drywall work.

See all Product description

Product description

Shark FineCut Pull Saw – Pull stroke saws provide a more accurate and controlled cut, reduce binding and allow a safer, easier start. Super FineCut saw is for fine woodworkers, furniture makers, boat repairs, crafts, and wooden model making. This saw has the thinnest blade (kerf 0.017″ of the SharkSaw line and is supported by a spine for stability. Makes exceptionally smooth, fine cuts in a variety of woods. Especially good for cuts in extremely hard woods such as oak, ebony, and ironwood. Ideally suited for cutting fine molding and intricate trim work – cuts as thin as 1/32″ are possible. Cuts are ready for immediate gluing and rarely require sanding. Blade is made from the finest Japanese high carbon spring steel. Sharp teeth are triple diamond ground and electrically impulse hardened for long lasting sharpness and fast, effortless, exceptionally clean cuts. Pistol grip handle with soft elastomer provides a secure grip and a comfortable cutting angle. Features a simple, twist lock blade for quick and easy replacement. – Type: Extra FineCut Pull Stroke, Blade Length: 10-5/8″, Teeth Per Inch: 17 TPI, Pkg Qty: 1, Package Type: Sleeve

From the Manufacturer

Designed for finish carpenters and skilled woodworkers, this fine-cut finish saw from Shark Corp features a 17-point blade for ultra fast, super-smooth cutting even in hardwoods. An extremely narrow kerf (0.017 inches) performs superbly on those precise molding and intricate trim jobs, and cuts as thin as 1/32 inches. A high-carbon Japanese spring steel blade construction means optimal durability and longer tool life. The blade cuts when drawn toward you for more natural, smoother, straighter, and less fatiguing sawing operations. No downward pressure required, just let the weight of the saw do the work for you. With a spine for extra stability, and an extremely tight, 17-tpi tooth set, this finish saw cuts exceptionally smooth in a variety of woods such as oak, ebony, and exotic imported species such as ironwood. Cuts are ready for immediate gluing; sanding is rarely, if ever, required, making this fine-cut finish saw a boon for furniture makers, boat builders, artisans, and all genres of fine-woodworkers.

FEATURES

• Raker Tooth for cleaning the sawdust out of the kerf as the blade is pushed forward
• Diamond-Ground for extreme sharpness and smooth cuts
• Impulse Hardening for twice the blade life of standard tools
• Rubber-like elastomer double-injection, non-slip grips, for long-lasting comfort
• Twist-lock design allows for fast, easy blade replacement

SPECIFICATIONS

• Recommended For: All types of hardwoods, miter cuts, dowels, dovetail work, crafts, balsa wood, thin boards, all types of precision cuts.
• Blade length: 10-5/8 inches
• Teeth per inch: 17

Product Description

Hand-Sharpened, Double-Tempered Chromium High Carbon Steel Blade Will Bite Into Any Part Of Nail Including Headless Nails. 9″ Long.

From the Manufacturer

Pneumatic nails often have weak heads, but SharkGrip nail pullers pull from the shank. The tool’s hardened “V” takes a positive bite into the nail’s shank for easy removal. The puller’s curved underside easily slides under an embedded nailhead or onto the nail’s shank. The back of the puller doubles as a striking head for your hammer. SharkGrip Nail pullers removes even embedded, headless, or rusted nails. An advanced tempering method in the drop forged construction process of this nail puller gives it extra durability to prevent chipping or bending. 9 in. for Finish Nail (1-1/4 in. to 2-1/4 in.) and Staples.

Product Description

All Sharkgrip Nail Pullers And Prybars Are Forged From The Finest Heat-Treated Japanese Alloy Steel; The Nail-Pulling And Prying Ends Are Double-Tempered For Added Strength. The Pulling “V” Is Hardened To A Rockwell 50-52 Hardness, Then Hand-Finished For Accuracy. The Resulting Tool Is So Strong It Can Even Bite Into Hardened And Stainless Steel Nails. Sharkgrip Nail Pullers Pull From The Shank Of The Nail, Not The Head. Sharkgrip Japanese “Cat’S Paw”-Type Nail Pullers Have Been The Choice Of Professional Cabinetmakers And Woodworkers For Years Because They’Re So Effective And Easy To Use. They Easily Dig Into Wood To Catch Even Headless Nails. Especially With The Proliferation Of Pneumatic Nailers, It’S Essential To Have A Genuine Sharkgrip Nail Puller In Your Tool Kit. 14-1/8″, For Finish Nails (10 Penny And Up), Common Nails (6-16 Penny), And Ring Shank Nails.

From the Manufacturer

An advanced tempering method in the drop-forged construction process of our top quality high-carbon steel Nail Puller gives extra durability to prevent chipping or bending. For those big nails and spikes. Superior for duplex concrete form nails. Hardened steel handles gun nails including ring shank and stainless steel with ease. This is the big powerful nail puller for those tough jobs.

From the Manufacturer

Shark 10-2204 Dowel/Dovetail/Detail Saw is a very fine cutting saw with very narrow kerf. Designed for tight detailed cuts in all types of wood. Blade flexibility allows flush cutting of dowels and plugs. A great saw for those detail cuts that a regular saw can’t handle. Recommended for all woodworkers.

Product description

Shark Replacement Pull Saw Blade – Replacement blade for pull stroke handsaw. Blades are made from the finest Japanese high carbon spring steel. The fine teeth are triple diamond ground and electrically impulse hardened for long lasting sharpness and fast, effortless, exceptionally clean cuts. Blades are easily replaceable with the push of a button. Replacement blades available. – Blade Length: 10-5/8″, Teeth Per Inch: 19 TPI, Pkg Qty: 1, Package Type: Card

From the Manufacturer

Replacement blade for 10-2410 Fine Cut Saw. A finish saw with no peer. This extremely fast and smooth cutting saw is a must have for all finish carpenters and skilled woodworkers. A great hardwood saw, can tackle even the hardest woods and maintain a smooth, sanded cut. Very narrow kerf for those precise molding and trim cuts.

Product description

The Shark Corporation 12-inch fine cut pruning saw produces the clean cuts needed for healthy trees and shrubs. Its unique blade shape (narrow at the tip) allows it to fit into tight spaces between branches for added convenience. The saw also features a thin pull-cut blade with teeth featuring three sharp cutting edges for fast, easy cuts. The double-tempered teeth remain sharp at least three times longer than other pruning saws on the market. Other features include a comfortable patented pistol grip elastomer handle with quick-release blade design that permits toolbox storage and easy replacement of worn blades. An ideal fine-cut pruning saw with diamond-ground teeth on three edges for exceptional sharpness. Cuts on the pull for greater control and power. Made with high-quality Japanese high-carbon spring steel. Twist-lock makes blade removal for storage or replacement simple. Patented pistol-grip handle with comfortable soft grip makes cutting easier.

Amazon.com

The Shark Corporation 12-inch fine cut pruning saw produces the clean cuts needed for healthy trees and shrubs. Its unique blade shape (narrow at the tip) allows it to fit into tight spaces between branches for added convenience. The saw also features a thin pull-cut blade with teeth featuring three sharp cutting edges for fast, easy cuts. The double-tempered teeth remain sharp at least three times longer than other pruning saws on the market. Other features include a comfortable patented pistol grip elastomer handle with quick-release blade design that permits toolbox storage and easy replacement of worn blades.