We spent many hours on research to finding shark bite diconnect, reading product features, product specifications for this guide. For those of you who wish to the best shark bite diconnect, you should not miss this article. shark bite diconnect coming in a variety of types but also different price range. The following is the top 10 shark bite diconnect by our suggestions
740 reviews analysed
1. SharkBite U711 1/2 inch Disconnect Tongs, 1/2-Inch
Description
Product Description
SharkBite 1/2″ Disconnect Tongs These easy to use disconnect tongs disconnect SharkBite fittings in hard to reach places where it can be tough to get a clip on the release collar. The stainless steel disconnect tongs are the perfect tool for anyone frequently using SharkBite Push to Connect Plumbing Fittings. This tool Depresses the collar using the force applied by your hand to allow the teeth of the fitting release the fitting from the pipe. CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. The SharkBite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. With no soldering, clamps, glue required, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. Disassembly is fast and easy using the disconnect tongs.
From the Manufacturer
SharkBite U711 Disconnect Tongs 1/2-Inch
2. SharkBite Deburring Pipe and Depth Gauge Tool, Copper, CPVC, Pipe, 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A
Feature
- SIMPLE: For depth insert the pipe into the gauge and mark the desired depth, then, rotate the tool around the pipe to remove burrs to achieve a clean edge and ensure a watertight seal
- USE: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 1 inch copper or CPVC Pipe
- COMPATIBLE PRODUCT: Same as part number U702 and U702Z
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times
Description
Product Description
“
SharkBite Deburr & Depth Gauge Tool
Our 2-in-1 tool is designed to simplify your plumbing project when using copper or CPVC tubing. Use it to remove burrs from copper pipe or CPVC pipe and to mark correct insertion depth for SharkBite fittings. The mark is used to confirm that the fitting is seated correctly to ensure a watertight connection.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. No soldering, clamps, glue required. It’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. The Shark Bite PEX tubing cutters are an integral tool in the easy-to-install SharkBite Connection System.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
“
From the Manufacturer
The Cash Acme U702A Shark Bite Deburring and Depth Tool is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
3. SharkBite U710A Disconnect Clip, 1/2-Inch, 3 PACK
Description
U710A 1/2 DEMOUNT CLIP
4. SharkBite U714A Disconnect Clip, Orange, 1 Inch
Description
Product Description
1 inch disconnect clip, Shark Bite push fit fittings for use with copper tubing cts, cpvc & PEX with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to asset 1061/Nsf61 standards, meets upc, ipc & cupc requirements, fitting are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panels, bagged.
From the Manufacturer
SharkBite U714A Disconnect Clip 1-Inch
5. Sharkbite U713A Fit Disconnct Tong 3/4"
Description
The SharkBite Disconnect Tong makes changing and disassembling SharkBite push-fit fittings fast and easy. Simply fir the tongs onto the fitting and pipe, squeeze the tongs together to retract the collar, and pull to slide the fitting off. The Product is manufactured in China.
6. SharkBite U708A De-Mount Disconnect Clip, 3/8", ORANGE
Description
Product Description
For quick and easy disassembly of the SharkBite Push-Fit Fittings.
From the Manufacturer
SharkBite U708A Disconnect Clip 3/8-Inch
7. SharkBite U088LFA 3/4-Inch by 3/4-Inch FNPT SharkBite Lead Free Straight Connector
Description
Product Description
SharkBite Push-to-Connect Brass Female Adapter – Female iron pipe end. Brass push fitting – no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F. , 200 P. S. I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0. 25% weighted average lead content on wetted surfaces. – Size: 3/4 In. x 3/4 In. FNPT, Material: Brass, Pressure Rating: 200 psi, Type: Push Adapter, Temperature Rating: 200 F, Pkg Qty: 1, Package Type: Bag Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov. –
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
8. SharkBite PVC Fitting UIP716A 3-Pack Disconnect and Depth Gauge for ½ inch, ¾ inch and 1 inch PVC Pipe
Feature
- Make a mistake with PVC transition installation no problem with SharkBite PVC transition fittings. Disassembly is fast and easy using this tool
- Tool can also be used as a depth-gauge to mark cvp pipe for accurate insertion
- Will release the white collar of a SharkBite iron pipe size fitting on sch. 40, 80, 120 PVC and sch. 40 and sch. 80 cpvc
Description
Need to make a change to an installed SharkBite PVC fitting or remove it? Disassembly is fast and easy using the PVC Depth Gauge and Disconnect Clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite PVC fitting in order to form a watertight seal.
9. SharkBite Fit Disconnct Tong 1/2"
Description
The Shark Bite Disconnect Tong makes changing and disassembling Shark Bite push-fit fittings fast and easy. Simply fir the tongs onto the fitting and pipe, squeeze the tongs together to retract the collar, and pull to slide the fitting off. The Product is manufactured in China.
10. SharkBite U710A Disconnect Clip, 1/2-Inch
Description
Product Description
1/2 inch disconnect clip, Shark Bite push fit fittings for use with copper tubing cts, cpvc & PEX with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to asset 1061/Nsf61 standards, meets upc, ipc & cupc requirements, fitting are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panels, bagged.
From the Manufacturer
SharkBite U710A Disconnect Clip 1/2-Inch
Conclusion
By our suggestions above, we hope that you can found Shark Bite Diconnect for you.Please don’t forget to share your experience by comment in this post. Thank you!
