Top 10 Shallow Well Pumps 3 4 Hp

Keep your rural home, farm, or cabin supplied with fresh water all year long for years to come with the help of this Red Lion RJS-100 1-HP Premium Shallow Well Jet Pump. This heavy-duty pump is designed with a 115/230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability.

It also features 50 PSI and a 23 GPM flow rate with automatic shut-off, voltage selector for simple connection to existing power sources, a factory pre-set 30/50 pressure switch, and a glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow. Ideal for shallow wells up to 25 feet in depth, the Red Lion RJS-100 1-HP Premium Shallow Well Jet Pump will get the job done.

1HP, 115V/60HZ/1PH, 7 stage, 33 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4” NPT discharge.
Warning: This is 110V pump! Using 220V will burn the pump!
Specifications:
* 4″ deep well submersible pump. 1 HP, 115V, 10.3 Amps, 7 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9, or MA0459X-14;
* Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Built in check valve included.
* Submersible design creates quiet operation
* Unique design reduces its noise.
* 207 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* User’s manual included and installation tape kit included.
* Warranty: 12 months limited manufacturer’s warranty

4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty

1HP, 230V/60HZ/1PH, 7 stage, 33 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4” NPT discharge.
Warning: This is 220V pump!

Specifications:
* 4″ deep well submersible pump. 1 HP, 230V, 5.1 Amps, 7 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Built in check valve included.
* Submersible design creates quiet operation
* Unique design reduces its noise.
* 207 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* User’s manual included and installation tape kit included.
* Warranty: 12 months limited manufacturer’s warranty

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

3/4 HP, 115/230 V, 60 Hz stainless steel shallow well jet pump system on a stainless steel 7 gal pressure tank. Eliminate rust and drink cleaner water with a stainless steel pump. Recommended for residential use in homes, cottages or farms. Maximum vertical lift of 25′. Built-in ejector. High performance Norrys impeller. Totally enclosed fan cooled motor powered by a full-time run capacitor to eliminate starting wear vs regular motors. Thermal and overload protection. Large stainless steel corrosion-resistant body, easy to prime. Built for an intermittent or a continuous use. Maximum pressure of 65 PSI, comes installed with pressure switch factory set to 30/50 PSI. 1″ NPT suction and discharge. 0 – 100 PSI pressure gauge. Factory assembled for quick and easy installation. Capacity at 30 PSI: 897 US GPH/5’; 749 US GPH/10’; 638 US GPH/15’; 555 US GPH/20’; 472 US GPH/25’.