Top 10 Long Range Rf Hc 12 Arduino


Nowadays, there are so many products of long range rf hc 12 arduino in the market and you are wondering to choose a best one.You have searched for long range rf hc 12 arduino in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings long range rf hc 12 arduino which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

922 reviews analysed

1. Deegoo-FPV NEW 10pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module

Deegoo-FPV NEW 10pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module



Feature * Model:NRF24L01;
* nRF24L01 is a single chip radio transceiver for the world wide 2.4 – 2.5 GHz ISM band.
* The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and
Enhanced ShockBurst? protocol engine.
* Output power, frequency channels, and protocol setup are easily.
* programmable through a SPI interface. Current consumption is very low, only 9.0mA at an output power of -6dBm and 12.3mA in RX mode.
* Built-in Power Down and Standby modes makes power saving easily realizable.
* Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control

* 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
* Built-in hardware CRC error detection, multipoint communication address control.
* Low-power 1.9 ~ 3.6V, only 1uA on Power down mode.
* Built-in 2.4Ghz antenna.
* Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers,

Software programming is very convenient.
* Support 6 Data channels of data reception.
* Standard DIP Pitch Interface for embedded applications.

Product Contents:

10*Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New

2. DAOKI 5PCS 315Mhz RF Transmitter and Receiver Link kit for Arduino/ARM/MCU/Raspberry pi Wireless

DAOKI 5PCS 315Mhz RF Transmitter and Receiver Link kit for Arduino/ARM/MCU/Raspberry pi Wireless



TX Technical Specifications:
Receiver module parameters
1.Product Model: MX-05V
2.Operating voltage: DC5V
3.Quiescent Current: 4mA
4.Receiving frequency: 315MHZ
5.Receiver sensitivity:-105DB
6.Size: 30 * 14 * 7mm
7.External antenna: 32CM single core wire, wound into a spiral
Technical parameters of the transmitter head
1.Product Model: MX-FS-03V
2.Launch distance :20-200 meters (different voltage, different results)
3.Operating voltage :3.5-12V
4.Dimensions: 19 * 19mm
5.Operating mode: AM
6.Transfer rate: 4KB / S
7.Transmitting power: 10mW
8.Transmitting frequency: 315M
9.An external antenna: 25cm ordinary multi-core or single-core line
10.Pinout from left ? right: (DATA; VCC; GND)

Application environment
Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.
1.VCC voltage module operating voltage and good power filtering;
2.Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 315M of about 23cm;
3.Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter.
Package included:
1x 315 mhz RF transmitter
1x 315 mhz RF receiver

3. Digitech Trio+ Band Creator + Looper w/ FS3X Footswitch, 4 Cables, and Power Supply

Digitech Trio+ Band Creator + Looper w/ FS3X Footswitch, 4 Cables, and Power Supply



DigiTech Trio+ Band Creator Looper Band Creator Effects Pedal with Automatic Bass and Drum Parts and FS3X Three Function Foot Switch ac power adapter with 2 instrument cable and 2 path cable for guitars

The TRIO+ is a simple-to-use guitar pedal that listens to the way you play and automatically generates bass and drum parts that match your song. Just plug your guitar into the TRIO+, press the Band footswitch to teach the TRIO+ your chords and rhythm, then press the Band footswitch again to start playing with your own personal band! Bass and drum levels can be adjusted for the perfect mix using the TRIO+’s Bass and Drums knobs. The TRIO+ also features a Simple Bass button lets you select between 3 bass line modes for busy or simple bass lines.guitar looper , digitech trio band , digitech trio plus looper , guitar pedal , guitar pedals , guitar pedalboard , pedal guitar , asin B01AV60KLQ and upc 691991001802 is for guitar looper. Pushing the Band Creator paradigm further, the TRIO+ also allows you to loop and custom sequence your looped guitar parts to create full songs on the fly. You can also apply built-in effects to your guitar signal by enabling the TRIO+’s Guitar FX button, or connect your favorite effects to the TRIO+’s FX Send and FX Return jacks.The TRIO+ provides 12 music genres to choose from including: Blues, R&B, Rock, Alternative Rock, Metal, Pop, Electronic Pop, Hip-Hop, Country, Folk, Latin, and Jazz.12 song styles are available for each genre and can be selected using the TRIO+’s Style encoder, including selection between 3/4 and 4/4 time signatures. Multi-colored LEDs around the TRIO+’s Style encoder indicate which styles best match your song. Bundle includes FS3X Three-Function Foot Switch The DigiTech FS3X is a welcomed addition to several DigiTech products; The Jimi Hendrix Experience The JamMan and Expression Factory to name a few. and 4 Cables.

4. Yealink Wireless Headset Adapter (EHS36)

Yealink Wireless Headset Adapter (EHS36)



Size:1 Pack

The new advanced Yealink Headset Adapter EHS36 provides the technical interface between Yealink SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P telephones and a compatible wireless headset. It is approved for use with wireless models made by major manufactures, including Jabra, Plantronics and Sennheiser. The unit is easy to install via a simple link from the EHS36 to the EXT phone port. Its plug-and-play mode gives you direct control of your Yealink phone, with the ability to answer and hang-up calls remotely. It has been designed specifically to ensure maximum effectiveness in reception areas, call-centers and general telephone use. The EHS36 is ideal for corporate, financial, health, government, educational, industrial and SME/SoHo market sectors.

5. DUALSHOCK 4 USB wireless adapter Japanese Ver.

DUALSHOCK 4 USB wireless adapter Japanese Ver.


6. Ridgid 20973 SeekTech 4-Inch Inductive Signal Clamp

Ridgid 20973 SeekTech 4-Inch Inductive Signal Clamp



Product Description

20973 Clamp, Seektech Induction, 4″. This item is used for Handtools & Tool Organizers , Clamps. This product manufacture by United States.

From the Manufacturer

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 20973 SeekTech 4-Inch Inductive Signal Clamp allows users to apply a signal to a cable or pipe when connecting directly to the target conductor is not possible. The clamp couples the transmitting signal onto the conductor which then allows users to locate using a compatible receiver such as the NaviTrack NaviTrack Scout or SR-20. Two built in LEDs inform the user the clamp is functioning properly. An integrated adapter allows users to attach a hot stick for out of reach lines.

7. IOGEAR 4K 4-Port Switcher with HDMI Connection, GHSW8441

IOGEAR 4K 4-Port Switcher with HDMI Connection, GHSW8441



Style:4K 4-Port Switcher with HDMI

The IOGEAR 4-Port 4K HDMI switch offers smooth, quick switching between four HDMI video sources such as a computer, Blu-ray or media player, and cable or satellite receivers and a single HDMI display. Send crystal clear, Cinema 4K video resolutions to 4096 x 2160 at 60Hz and uncompressed audio for any variety of uses including home theater, in lobbies and conference rooms and for digital signage. Easily switch between each source automatically or manually. Utilize one of three switch modes and auto-cycle through your sources with smooth video transitions to display a variety of content. Manually switch between sources with the included IR remote control, program a universal remote via the RS-232 serial interface or select a source via front panel push-buttons in settings where a remote control is not needed. Connect and switch between 4 HDMI sources on 1 HDMI display Cinema 4K resolutions to 4096 x 2160 at 60Hz (4: 4: 4) distribute uncompressed audio formats flexible control via push-button, IR remote & RS-232 serial control bi-directional RS-232 support for universal remotes & touch panels auto-switch mode detects & selects New HDMI port connections supports high-speed data rates up to 18 Gbps no-slip locking power supply mechanism HDMI 2.0 & HDCP 2.2 compliant CEC compliant enjoy clear, superior Cinema 4K video quality with resolutions to 4096 x 2160 at 60Hz to each display. The terms HDMI, HDMI high-definition multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing administrator, Inc.

8. RioRand(TM 433MHz Superheterodyne RF Link Transmitter and Receiver Kits 3400 for ARM/MCU

RioRand(TM 433MHz Superheterodyne RF Link Transmitter and Receiver Kits 3400 for ARM/MCU



TX Technical Specifications:
a. Working voltage: 3V?12V
b. Working current: max?95mA (12V), min?2mA(3V)
c. Resonance mode: sound wave resonance (SAW)
d. Modulation mode: ASK /OOK
e. Working frequency: 315MHz-433.92MHz, customized frequency is available.
f. Transmission power: 25mW (315MHz at 12V)
g. Frequency error: +150kHz (max)
h. Velocity: ?10Kbps
i. Self-owned codes: negative RX Technical

a. Working voltage: 5.0VDC +0.5V
b. Working current:?2.5mA (5.0VDC)
c. Working principle: superheterodyne
d. Working method: OOK/ASK e. Operating frequency: 315MHz, 433.92MHz, customized frequency is available;
f. Bandwidth: 2MHz (315MHz, having result from testing at lowing the sensitivity 3dBm)
g. Sensitivity: excel -105dBm (50?)
h. Velocity:
i. Output signal: TTL electric level signal entire transmit

9. Canon RF 50mm f/1.2L USM Lens, Black (2959C002)

Canon RF 50mm f/1.2L USM Lens, Black (2959C002)



The RF 50mm f/1.2L USM from Canon is highly sought after due to its versatile focal length and bright f/1.2 maximum aperture. This new lens excels in difficult lighting conditions and working with shallow depth of field and selective focus techniques. Lens Construction 15 elements in 9 groups and Diagonal Angle of View 46 Degrees.

10. Yamaha Wireless USB to Host MIDI Adapter

Yamaha Wireless USB to Host MIDI Adapter



Simple and easy wireless connection of instruments with a USB to host terminal to iOS devices and Mac makes it easy to use a wide range of music applications wirelessly for even more enjoyable performing and composing.


By our suggestions above, we hope that you can found Long Range Rf Hc 12 Arduino for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Enable registration in settings - general