Top 9 Interior Office Door Cover

Questions issues call us! please make sure you are using a quality set of batteries. Most issues are resolved by replacing batteries. When using a premium set of batteries, you can expect at least 6 months of battery life. Do not use low quality batteries. Low quality batteries will need Replacement within weeks, if not days. Your MiLocks product is covered under our triple warranty coverage. 25 search mechanical warranty, 1 year electrical warranty, an a limited lifetime warranty on the exterior finish.

Turn any clear glass window into a stylish privacy screen with this etched glass window film, ideal for windows that aren’t well suited for curtains or blinds. Also ideal for commercial use, the window film is finished in white with the look of frosted glass and will protect carpet and upholstery from fading due to UV rays. Innovative solution for privacy and decor. Easy to install and remove-applies in minutes to smooth glass uses no adhesives. Unaffected by heat, cold, steam and humidity. Provides U.V. protection. Pattern: Etched.

Great for Bathroom, Bedroom, Kitchen, Office, Reading room, Frontdoor.

Instruction:
1.Measure the size of your window. Cute the film into proper size, approximately 1 inch larger;
2.Clean your window thoroughly;
3.Wet the window completely(better with low-concentration soapy water);
4.Peel off the backing clear protective film gently;
5.Position the film against the window and press across the entire film to allow it grip slightly;
6.Smooth out the film with squeegee, make sure there is no air bubbles and water inside;
7.Dry off your window with a rag entirely, cut the excessive edge carefully.

Q&A:
Q:How long will this film last for?
A:In normal condition, it will last for 2 year on the window.

Q:Why there is bubbles inside?
A:Because the water is not clean out entirly. After you position the film, please smooth out the film with squeegee, make the air bubbles and water out completely.

Q:Could this film be used for more than one times?
A:Yes, but the stickup side of the film must be completely clean.

Struggling to keep temperatures consistent in your home? Can’t stop pests from invading your living space? Need soundproof doors that block out noisy neighbors? Our 5-in-1 under door draft blocker does it all!

Q: How well does it block sound and moisture?
A: With three hefty layers of waterproof insulation, loud noises and moisture are no match for the door draft blocker.

Q: Can the door guard be cut to size?
A: Yes! The door blocker is easy to cut with a utility knife or scissors.

Q: Should I use the draft guard on the inside or outside of my door?
A: It’s up to you! The under door seal is versatile, so you can place it on an interior door or exterior door.

How to Install Your Door Seal:
1. Use rubbing alcohol to thoroughly clean the application area.
2. Measure the length of the area you want to seal and make sure the door seal strip is barely touching the floor. Cut to size.
3. Ensure room temperature is above 75 degrees when applying. If needed, use a hair dryer to warm the area before installing.
4. Peel backing off the adhesive and be sure not to get dirt on it. With the door closed, adhere the strip by pressing firmly.
5. During the first 48 hours after installation, re-apply firm pressure to the door bottom seal several times and use the door as little as possible for the first 48 hours.

5-in-1 Multifunctional Door Trim:
✓ Improves energy efficiency
✓ Stops drafts and dust
✓ Blocks moisture
✓ Dampens sound
✓ Keeps insects and rodents out

Who It’s For:
► Homeowners and renters who love lower energy bills
► People who hate insects and rodents in their home
► Anyone who wants a soundproof door

Don’t settle for a drafty, noisy, bug-ridden home. Get your door weatherstrip today and kick higher energy bills (and annoying critters) to the curb!

From manufacturer:
This is a very fashionable door handle,black and Oil Rubbed Bronze color perfect combination,Added to its uniqueness.
Adopt high quality stainless steel, brass material.Electroplating process makes it more beautiful, corrosion resistant and stronger.
It fits in privacy, bathroom and bedroom doors, or wherever you need it.Enhance the decorative feeling and security in the home.

Specification:
Color: Oil Rubbed Bronze
Weight: 0.9lb
Door thickness: 1.18″(30mm) to 1.97″(50mm)
Material: stainless steel,aluminum, brass
Function: privacy, passage,spring-latch locks,tubular locks, storeroom, classroom, hotel, bedroom, bathroom and so on .

Attention
– The lock is suitable for while the length form the edge of the lock to the edge of the door is 2-3/8″ or 2-3/4″(60mm or 70mm) ,pls take a measurement before ordering.
– Drill a door hole (if you need ) generally recommended diameter:(2.09”-2.36”,53-60mm), cannot more than 2.36” or 60mm, if the maximum value near the cover, there will be untight / can not be installed.
-Lock moving backward and forward automatically:1,Door too thin 2,The screws are not locked. 3,The cover is not clamped.

Package
1* Locks
3* Key
2* Big Screws
4* Small Screws
1* Lock Tongue
1* Door Stop
1* SMD Accessories
1* English Operation Guide

Dear friend,
Please feel free to contact us first if you have problem so that we can supply the best solution for you.

The Frosted window film keeps your home protected from prying eyes even during night without it is non-adhesive and not easy to get Bubbles and wrinkles during application. It’s an inexpensive alternative to stained or etched glass, saves energy and cost. 1. Cut the pieces of film so they measure about 2-3cm larger than the window panes being covered. 2. Peel off the transparent back side of the film. 3. Generously spray enough water/dish washing liquid mix with water onto the window surface. The water makes it easier to position the film and helps hold it on the window. 4. Apply from top to bottom, for large size window, two people is recommended. 5. Use squeegee to push the bubbles out. 6. Trim the extra film. Tips: 1. Newspaper or waste paper is ideal to remove tiny spots on window surface, these spots will create bubbles on your finishing. 2. Generously spray dish washing liquid water onto the exposed back side of the film makes the separation easier. 3. Be sure the window is dripping wet, if it becomes dry, rewet it completely before applying film. 4. Apply in early morning or late evening when the glass is cooler to avoid Bubbles/spots. 5. Please make sure to leave 2mm (0. 08 inches) gap between the film and the window frame since there are sealant glue or painting residue left on the corner. When heat expands, the film will easily fell off.