Top 10 Fuel Shark Gas Saver

Most spills occur tipping a normal can to get the spout into the tank opening before the liquid comes out, or removing the spout from the target vessel before overflowing. The No-Spill spout is fully user controlled so you tip the can vertical, insert the spout into the vessel opening, then press the button to begin and control pouring. To stop pouring simply release the button. Practically eliminates spills and overflows. The only Spill-Proof spout with thumb button control that does not push down on your tank’s filler neck to pour. More control, fewer tip-overs of your small equipment. The fastest pouring Spill-Proof nozzle available. At up to 3 gal/min, compare to other brands at 1.5 to 2.0 gal/min. Meets California Air Resources Board requirements for sale or use in California. Autostop removable nozzle, single opening for filling & pouring, treated can body for low permeation. Rear handle for pouring makes it the most user friendly CARB compliant 5 gallon can available. 6-inch Flex Spout Extension (sold separately) allows filling of on-road vehicles, boats and many other hard to reach tank openings. No-Spill Gasoline cans are tested and certified to ASTM F-85299 Standard Specification for Portable Gasoline Containers for Consumer Use and our Diesel & Kerosene cans are tested and certified to ASTM F-97602 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use. 5 Gallon CARB cans feature rear handle for well balanced pouring. Puts the can into the perfect position for pressing the thumb button.

Product Description

Galvanized Type I cans meet OSHA (Occupational Health and Safety Administration) and NFPA (National Fire Protection Association) Code 30 requirements and are UL (Underwriters Laboratories) and ULC (Underwriters Laboratories of Canada) listed and FM approved for safe handling and storage of gasoline and other flammable liquids. Features Lead Free Technology, constructed of 24-gauge hot dipped galvanized steel. Patented Comfort-grip trigger release, spring closing lid with neoprene gasket vents a 5 psi (pounds per square inch) internal pressure. Non-sparking brass flame arrestor and pour spout. Deep drawn construction means no top or side beams. Baked on powder-coat finish. Trilingual label. Safety can spout, Model No. F-15 (SKU 571811) may be purchased separately. Galvanized Type I cans meet OSHA (Occupational Health and Safety Administration). This product is manufactured in United States. This product meets customer requirement.

From the Manufacturer

Eagle 5 Gallon Red Safety Gasoline Can meets OSHA and NFPA Code 30 requirements and are UL and ULC listed and are FM Factory Mutual approved for the safe handling and storage of gasoline and other flammable liquids. Eagle cans feature Lead Free Technology, constructed of 24-gauge hot dipped Galvanized steel, deep drawn one piece seamless body construction, non sparking brass integral pour spout, with a spring closing lid with neoprene gasket which vents at 3-5 psi internal pressure. The can features a fixed handle and patented comfort grip trigger release for easy dispensing, a double interlock no-weld bottom seam, 100% Leak tested, and a baked on red powder coat finish. Eagle cans are made in the USA, by USA workers and with USA quality. Family owned business making quality products since 1894 in Wellsburg, West Virginia

STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects engine from gum, varnish, rust and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing.

New STA-BIL 360° Marine is the only fuel treatment to emit a revolutionary vapor technology that rises above the fuel line to protect your engine where others before it can’t. Use it with every fill up to help keep your engine running cleaner, leaner, smoother and stronger than ever.

Usage / Notice
1. Be sure to check the valve lock before assembling the gas container, and use it in a safe outdoor location where there is no fire.
2. Tighten the gas container you want to use based on the printing direction, and assemble the gas container with the remaining amount on the upper part.
The gas container at the bottom should have enough free space to accept the gas being transported.
3. If you put the gas container located at the lower part in the freezer for about 10 ~ 20 minutes, it will be cooled and the internal pressure and volume will be smaller than the remaining gas container. (The freezer and cooler can be used for easy operation without any additional vaporization.)
4. If the forced pressure difference cannot be made, close the valve and press the gas discharge button for 4 to 5 seconds to change the pressure of the lower vessel to the normal pressure and open the valve again. (When using the eject button, it is effective to have enough free space in the container located at the bottom)
5. If the remaining amount of columnar gas container is moved, tilt it more than 45 degrees so that the groove part which is connected with the adapter is facing downward.
6. When removing the gas container, separate it with the outlet of the container facing upward. (When disconnected in the upside down position, the minute leakage may increase)
7. Check the overcharge state by measuring the weight of the gas container after moving. There must be shaking.

Star Tron Enzyme Fuel Treatment uses unique enzyme technology to improve overall fuel quality. Star Tron Gasoline Formula makes engines start easily and run smooth. It “cures & prevents” Ethanol fuel problems such as water in fuel, or lost power. It also helps prevent phase separation, removes gums, varnish and carbon deposits and will stabilize gasoline for up to 1 year. It works in boats, cars, motorcycles, small equipment or any other 2 or 4-cycle engine.

Usage / Notice
1. Be sure to check the valve lock before assembling the gas container, and use it in a safe outdoor location where there is no fire.
2. Tighten the gas container you want to use based on the printing direction, and assemble the gas container with the remaining amount on the upper part.
The gas container at the bottom should have enough free space to accept the gas being transported.
3. If you put the gas container located at the lower part in the freezer for about 10 ~ 20 minutes, it will be cooled and the internal pressure and volume will be smaller than the remaining gas container. (The freezer and cooler can be used for easy operation without any additional vaporization.)
4. If the forced pressure difference cannot be made, close the valve and press the gas discharge button for 4 to 5 seconds to change the pressure of the lower vessel to the normal pressure and open the valve again. (When using the eject button, it is effective to have enough free space in the container located at the bottom)
5. If the remaining amount of columnar gas container is moved, tilt it more than 45 degrees so that the groove part which is connected with the adapter is facing downward.
6. When removing the gas container, separate it with the outlet of the container facing upward. (When disconnected in the upside down position, the minute leakage may increase)
7. Check the overcharge state by measuring the weight of the gas container after moving. There must be shaking.