Top 10 Extended Range Antenna Kit Fpv

5.8G 7dBi Mushroom Antenna and 14dBi Panel Antenna High Gain FPV Antenna Kit RP-SMA Male for EV800D FPV Goggles Receiver RC Drones Quadcopter etc

Features:
Item name: Mushroom Antenna
Gain: 7dBi
Frequency: 5.8GHz
Connector: RP-SMA Male

Item name: Panel Antenna
Gain: 14dBi
Frequency: 5.8GHz
Connector: RP-SMA Male

Mushroom Antenna and Pannel Antenna Kit providing most compatibility for FPV Goggles and other receivers.

Package Including
1 * Mushroom Antenna RP-SMA Male
1 * Pannel Antenna RP-SMA Male

FPV Antenna Kit 5.8Ghz 14dBi Panel SMA Antenna 2.4GHz 3dBi SMA Antenna SMA to IPEX Cable for FPV Multicopter

Description:
This FPV Antenna kit use for H501S H107D+ H107D RC Quadcopter, with enhanced FPV
Distance.
Brand Name: Hubsan
Item Name: Antenna Kit
Usage: for H501S H107D H107D+ X4 RC Quadcopter
Need to make 2 holes in the upside of the controller.
For H501S: No solder need .
For H107D and H107D+: solder need.
Package Including
1 * 14dBi 5.8GHz Panel Antenna
1 * 3dBi 2.4GHz Antenna
2 * SMA to IPEX Cable

The ImmersionRC 13dBi SpiroNET Patch has been the antenna of choice for pilots who like to push the limits since 2013. The Long Range Kit combines two of them in custom goggle mount, with custom cables to hook up to a rapidFIRE receiver.

Specification:
Model: iFlight 5.8GHz Antenna
Frequency range: 5.5-6.0GHz
Gain: 2.0Dbi
Axial Ratio: <>
Weight: 11.6g
Dimension: 16*150mm
Interface: SMA Male
Polarization: RHCP
SWR: <1.1 (on="">
Color: Black

Package included:
2 x 5.8GHz FPV Antenna

Foxeer FPV Pagoda Antenna 5.8G 2dBi 150mm SMA Antenna

Specification:
Shell material: Imported PC+ABS
Weight: 14.3g
Antenna length: 150mm
Gain: 2 dbi
Center frequency: 5.8 GHz
Bandwidth: 500 MHz (5.5 – 6.0GHz)
Matching: S11 < -20="" db,vswr="">< 1.15="" (at="" center="" frequency)="">
Axial ratio: < 1.3="">
Radiation efficiency: 95%
Polarization: RHCP
Connector: RP-SMA / SMA
Color: Black

Package Included:
1 x Foxeer Pagoda Antenna 5.8G 2dBi RHCP FPV Antenna

Center frequency: 5.8 GHz
Bandwidth: 660 MHz (5.47 – 6.13 GHz)
Match: S11 < -="" 20="" db,="" vswr="">< 1.22="" (at="" center="">
Axial ratio: <>
dBi antenna gain: 9.4
Half power beam width: 55° (horizontal and vertical)
Radiation efficiency: 83.5%

BlueProton ARGtek DJI Mavic Pro/Spark WiFi Signal Range Extender Kit 6 Antennas – 2 Dual Band Omni + 2 Dual Band Panel + 2 Single Band Panel Two customized high-gain 2.4GHz/5.8GHz 8dBi panel antennas (Unobstructed, line of sight). Two customized high-gain 2.4GHz/5.8GHz 8dBi Omni-directional antenna with installation hardware. Two customized high-gain 2.4GHz 7dBi panel antenna (Unobstructed, line of sight). Lightweight, durable, practical and convenient to use in compact design. Easy install, no need to drill the remote control or drone, avoid out of warranty. Enable full 2.4GHz-5.8GHz, you may need to manually switch between 2.4GHz-5.8GHz to get the least interference. What is the difference between Panel and Omni antennas? The Panel antenna is preferred for pilots who need long range but can maintain straight “line of sight” with the aircraft when in the air. This requires more skill for handling to reach the maximum range. The Omni-directional antenna is preferred for pilots using the drone for Film/Video Production,Search & Rescue or Research teams, and Commercial Aerial Photography because the Omni antenna creates a surrounding signal for increased range around obstructions and signal pollution. Dual Band vs. Single Band: 2.4GHz band is crowded in the city, but in open area the 2.4Ghz signal is stronger than 5.8Ghz. Single band antennas are generally around 30% stronger signal than dual band. Dual band antenna is more user- friendly because you do not need to unscrew antennas to switch bands, however the signal is reduced up to 30%. Environmental factors affect every location – whether it is signal pollution / interference – large buildings or trees, or the topology of the land – so every situation will be different and will require experimentation to find the best configuration. Support Link: If you need technical support, please see this link

TECHTOO, known as a worldwide registered brand owned by TECHTOO Inc. is one of the most desired brand in North America, Europe and Asia.

*Note:
This antenna with SMA MALE Plug connector (Thread inside WITH Pin).
It only match SMA Female connector (Thread outside WITHOUT Pin)
Compatible with FOSCAM IP Camera (Connector type: Thread outside WITHOUT Pin)
Change ALL the Antennas into NEW TECHTOO 9dBi Antennas, If your old Device Have More Than One Antennas.

TECHTOO 9 dBi 2.4GHz Omni Antenna with SMA-Plug Connector Can Increase The Range of Your Wireless Router/Access Point or Client.
Off the shelf equipment typically has a 2.0 dBi antenna. This antenna will increase your signal strength and therefore range.

The Rugged Polycarbonate Body Makes Them Suitable For Use In a Wide Variety Of Applications, Including Office LAN Environments
Factory Floors, Remote Telemetry And Other Environments.

The SMA Male Connector Has Threads on The Inside And a Center Pin. The Tilt And Swivel Feature Allows The Antenna To Be Positioned At Practically Any Angle.
This Screw-on, Swivel Mount SMA MALE Connector Is Compatible With Many Wireless Communications Systems Including: Dlink, GRE America, Linksys WET11, Maxtech, Netgear, Proxim, Siemens, SmartBridges, Waveaccess, Zcom, Netgate Wireless-Redy M1n1wall, RouterStation PRO Products And All USB Adapters With Screw on/off Antennas ,Such As The ALFA And EnGenius USB products.

Legal Statement: Copyright 2016 by TECHTOO Inc. All rights reserved.
No part of the description above may be reproduced, distributed, or transmitted in any form or by any means, including relisting to Amazon or any online marketplace, photocopying, recording, or other electronic or mechanical methods, without the prior written permission of TECHTOO Inc. For permission requests, write to the seller ID below: Amazon Seller ID: A3FOIJMNOEIRMM