We spent many hours on research to finding beat sonic shark fin antenna scion frs raven, reading product features, product specifications for this guide. For those of you who wish to the best beat sonic shark fin antenna scion frs raven, you should not miss this article. beat sonic shark fin antenna scion frs raven coming in a variety of types but also different price range. The following is the top 8 beat sonic shark fin antenna scion frs raven by our suggestions
886 reviews analysed
1. Authentic Genuine Nagoya UT-308UV 21-Inch Magnetic Mount VHF/UHF (144/430Mhz) Antenna SMA-Female for BTECH and BaoFeng Radios
Feature
- Certified Original Nagoya Antenna – Only sold through BaoFeng Tech, insure BaoFeng Tech is your selected buying choice to guarantee accuracy in item description.
- SMA Female Connector, includes SMA jumper, Dual-Band VHF & UHF (137-174, 400-520 MHz), Weatherproof, Strong Rare Earth Magnet Base
- Easy To Install, Omni-Directional, Requires Metal Ground Plane, Measures 22 inches, Stainless Steel Antenna
- Compatible with the Any Tone: TERMN-8R, OBLTR-8R, NSTIG-8R, and ANILE-8R
- To avoid counterfeit Nagoya models – insure your listing shows “sold by BaoFeng Tech”
Description
The Nagoya UT-308UV is a dual-band magnet mount antenna with up to 3 dB of gain. It is designed to be used with your handheld radio (with the common thread SMA-Female adapter). An included super flexible SMA jumper allows for easier installation to your handheld. It will help improve your signal by mounting the antenna on any vehicle with a steel body (like cars).
The UT-308UV antenna, when mounted vertically is Omni-directional which allows it to receive signal from all directions.
It uses a very heavy duty rare earth magnet on it’s 3.25 inch magnetic mount and is the perfect antenna for cars, pickup trucks, vans and SUVs. With 10′ of Heavy Duty RG-58 you are able to set up your Antenna on almost any vehicle application.
The antenna itself is 2.5mm thick compared to the usual 1.5mm antennas found on most vehicle magnetic mounts. Also Included in the package is a RG316 SMA Jumper that allows easier installation on your handheld radio.
The jumper has been tested at the perfect length to resist line loss – insuring the maximum performance from your radio.
Package:
1x Nagoya UT-308UV Magnetic Mount Antenna with SMA female connectors.
1x SMA RG316 Jumper
Compatible with:
BTECH Handheld Radios: GMRS-V1, MURS-V1, UV-5X3
BaoFeng: BF-F8HP, UV-82C, UV-82X, UV-5R, BF-888s and all models with SMA-Female
And any other radio that uses the SMA-FEMALE connection
2. Beat-Sonic FDA43-D4S Raven Functional Shark Fin Antenna
Feature
- Manufactured for 2013 Scion/Subaru (Canada Model only) FR-S/BRZ (Canada Model only)
- 3M Double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM radio and HD radios. Patent pending design. Made in Japan.
3. Anteenna TW-999BNC BNC Male Handheld Antenna Scanner Antenna (20-1300MHz) with BNC Male Connector for Scanner Radio and Frequency Counters
Description
* Telescopic antenna For Scanner Antenna, not CB Antenna
*Frequency: 20-1300MHz ((Not Tx ( Transmit ) Function ))
*Max Power:10W
*Length: 18.6cm ( retracted)/127.0cm(full use)
*BNC Male connector
4. Possbay Universal Car Antenna Aerial Shark Fin Radio Signal for Auto SUV Truck Van
Feature
- Shark fin antenna, enhance the vehicle’s signal with FM/AM connection cable inside and decorate your car, truck, SUV, etc
- Universal replacement part for replacing your existing mast and cover the antenna base that is on your vehicle, if the size of your original antenna’s base is smaller than the bottom dimension (approx 3.19”x2.48”),this shark antenna will fit your car
- Come with the needed screw to connect the wire to your antenna base and adhesive tape to ensure a good seal when mounting it over your existing antenna base
- Shark fin design is amazing, concision and modern, making your car cool and distinctive
- Easily on Installation, No Drilling Required
Description
Specifications:
Height:approx 65mm/2.6inch
Width:approx 70mm/2.8inch
Length:approx 170mm /6.69inch
Material : High-Quality ABS Material
Fitment: Fit for Most of Car, Trucks, etc (Please check the size before you place the order)
Package includes:
1x Shark Fin Antenna
5. Shakespeare QC-4 QuickConnect VHF Antenna (4′ VHF Marine Band 3dB),1 Pack
Feature
- Quickconnect system, screw or unscrew antenna to disconnect or connect
- High quality connection so that no noise is generated due to vibrations
- Splash protection cap to protect the connector on the mount when antenna is disconnected
- Center pin receptacle-259 connector is an easy crimp-on type connector
- Standard mount design to easily upgrade to a high-end Shakespeare antenna without purchasing a new mount
Description
Stemming from the popularity of the quick connecting feature on Shakespeare high-end phase III marine antennas, the new quickconnect product line brings you the ease of connecting and disconnecting your marine antenna in a series of entry-level antennas. To be used with quickconnect mounts only.
6. Beat-Sonic FDA9-D4S Crystal Black Silica/Raven Functional Shark Fin Antenna
Feature
- Manufactured for 2013-2014 Scion/Subaru FR-S/BRZ
- 3M Die-cut double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals (from OEM)
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Lower profile and sportier compared to the other antenna models. Tested to provide the car with better driving stability at higher speeds. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM Radio, HD radio and satellite radio signals (from OEM). Patented design. Made in Japan.
7. HYUNDAI Genuine OEM Shark Fin Dummy Antenna Assembly 96210-1M800
Description
genuine oem part
8. Shark Antenna,Fin Roof Aerial Base Radio Signal for Jeep Ford Compass Cherokee Latitude Universal Car SUV Truck Van,Super Functional & with Adhesive Tape Base
Feature
- 【Improtant】If the size of your original antenna’s base is bigger than 2.36″x3.15″(148mm*67mm),this shark antenna will not fit your car. When you find scratch on this antenna cover due to transportation, please wipe gently with a wet towel
- 【Universal】Fit for most cars having a slightly curved or flat roof surface to install the shark fin antenna. This shark fin antenna is designed with unique stream lined shark fin, achieve the purpose of decoration, let your car more brilliant.
- 【Best Replacement】The shark fin universal antenna can replace your original antenna. As the signal amplifier, this shark fin antenna can enhance the vehicle’s signal with FM/AM connection cable inside while driving
- 【Easy to install】 Self-adhesive installation, no drilling required, just clean and dry your car, stick the antenna fin on the surface. Strong paste, not easy to fall off
- 【High Quality】The car antenna shark fin is made of high quality paint technology. Bright color, not easy to fad. Waterproof, dustproof, anti-exposure, sturdy and drop-proof
Conclusion
By our suggestions above, we hope that you can found Beat Sonic Shark Fin Antenna Scion Frs Raven for you.Please don’t forget to share your experience by comment in this post. Thank you!
