The Best Shark Bite Faucet Installation Kit

SharkBite Faucet Kit with Angle Stop
The SharkBite Faucet Install Kit has everything you need to install a new kitchen faucet or sink. This faucet install kit includes:

• 2x SharkBite 1/2 inch x 1/4 inch (3/8 inch O.D.) Push-to-Connect Angle Stop Valves
• 2x 5 foot 1/4 inch PEX pipe tubing
• 2x 1/4 inch (3/8 inch O.D.) SharkBite Swivel Faucet Connectors
• 1x 1/4 inch Chrome Trim Cover that reverses as a disconnect clip to remove the pipe from the valve if needed.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

Product Description

SharkBite1/2″ X 3/8″ Compression Angle Stop Valve We use high quality DZR Lead Free Brass for our 1/2 x 3/8 Quarter Turn Angle Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. CUT. PUSH. DONE. The Shark Bite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the Shark Bite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. Shark Bite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, Shark Bite fittings are the push-to-connect solution for leak-free results.

From the Manufacturer

SharkBite 23036-0000LF Angle Stop 1/2-Inch X 3/8-Inch Compression Lead Free

Click Seal Faucet Connector
This corrosion resistant 1/2” Faucet Connector is the fastest way to install a new faucet. The 1/2” push-to-connect valve with quarter turn angle stop on one end with click seal technology on the other end ensures a watertight connection. Click Seal provides a noticeable click that prevents overtightening, thus creating a watertight seal.

*Click Seal is a registered trademark of Fluidmaster, Inc.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

We use high quality lead-free brass for our 12” SharkBite Frost Free Sillcock valve. Includes a built in hose bibb for strength and a multi turn shut off valve for cold weather draining and protection against freezing temperatures. Anti siphon frost free sillcock valve protects the faucet from any potential back pressure and contaminated water flowing back into the main water line.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

Product Description

SharkBite 1/2″ X 3/8″ Compression Straight Stop Valve

We use high quality DZR Lead Free Brass for our 1/2” x 3/8” Quarter Turn Straight Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

From the Manufacturer

SharkBite 23037-0000LF Straight Stop 1/2-Inch X 3/8-Inch Compression Lead Free

Product Description

Shark bite, 1/4″ x 1/2″ female x 14″, lead free, thread faucet connector, for use with copper tubing copper tube size, cpvc & PEX with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to assess 1061/Nsf61 standards, meets upc, ipc & cupc requirements, fittings are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panels, lead free Compliant to federal law 111-380, bagged.

From the Manufacturer

Shark Bite push-fit fittings are the fastest, easiest way to join copper, CPVC and PEX in any combination-wet or dry-with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Fittings certified to 200 PSI and 200-DegreeF (93-DegreeC). Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels

4 Pack of SharkBite1/2″ X 3/8″ Compression Straight Stop ValveWe use high quality DZR Lead Free Brass for our 1/2” x 3/8” Quarter Turn Straight Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve.CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

We use high quality lead-free brass for our 1/2 inch x 3/4 inch MHT water bibb valve with a tough multi turn handle which allows for water flow regulation. Perfect for installing a new bibb where a shut off is needed or repairing a current hose bib.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

SharkBite Toilet Kit with Angle Stop
The SharkBite Toilet Pipe Connector Kit has everything you need to install a toilet pipe valve. This faucet install kit includes:

• SharkBite 1/2 inch x 1/4 inch (3/8 inch OD) Push-to-Connect Angle Supply Stop Valve
• 5 foot coil of 1/4 inch PEX pipe tubing
• 1/4 inch (3/8 inch OD) SharkBite x 7/8 inch Ballcock Swivel Toilet Connector
• 1/2 inch Disconnect Clip
• 1/4 inch Disconnect Clip

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.