Top 10 Kit For 12 Hp Goulds Pump

Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT ‘Manufacturer Refurbished’. We are based in the U.S., customer services, tech support & warranty are handled in the U.S.
FEATURES:
* 4″ deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides heavy duty higher performance and longer life than most other well pumps.
* Solid stainless steel body with heavy duty cast iron discharge
* Industrial grade heavy duty, also good for home usage.
* Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump with 3-Wire (2 wires + ground wire),10′ long electric cord included
* 1.25″ NPT discharge
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire).
* Submersible design eliminates the need for priming and creates quiet operation.
* High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy.
* 150 Max head is for open water tank. The max head will be reduced in pressure tanks. Read the ‘Selection Guide’ for details!
* Installation manual, and tape kit are included.
* Free technical support available during installation.
* Warranty: 12 months limited manufacturer’s warranty

Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼” NPT suction, 1″ NPT discharge, 1″ NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140°F Pressure regulator included. Pumps are manufacturer tested and may contain water inside from such testing

The J7 is specifically designed for homes farms cottages and booster services. Its Convertible design may be used on shallow or deep well applications using appropriate fittings.This pump features a back pull-out design two compartment motor for easy access to wiring nozzle clean out plug in shallow well adapter and is corrosion resistant. Volts: 115/230, amps: 14.8/7.4

Model: JP550T Features & Benefits Every pump is 100% factory tested 3 year warranty Factory certified performance curve included Rated for continuous duty Rugged cast iron construction maximizes pump life Piggy-back tethered float for automatic or manual operation Non-clogging vortex impeller passes 2 in. solids High efficiency permanent split capacitor motor with automatic reset thermal overload protection Ball bearings for quiet operation 10 ft. power cord Carbon and ceramic sealed motor for long life Specifications: Construction Materials Motor Cover: Cast Iron Volute: Cast Iron Motor Horsepower: 1/2 RPM: 3,450 Volt: 115 AC, 60 Hz Full Load Amps: 7.4 Type: Permanent Split Capacitor (PSC), oil cooled Insulation: Class B Rating: Continuous Duty Discharge Size: 2 in. Solids Handling: 2 in. Liquid Temperature (max.): 130 F (55 C) Hardware: Stainless Steel Impeller Type: Non-Clog Vortex Material: Impact Resistant Thermoplastic Bearing Type: Ball Shaft Seal: Carbon/Ceramic Power Cord: 10 ft. grounded three-prong, water-resistant, type SJTW-A/SJTW Switch: Piggy-back tethered mechanical float, 10 ft. cord Switch On Level: 15 in. Switch Off Level: 7.3 in. Shut Off Head: 18 ft. Maximum Flow: 108 GPM Minimum Sump Diameter: 18 in.

4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty

Product Description

The Wayne CWS50 1/2-horsepower shallow well jet pump is for wells up to 90-feet deep. At 50 psi it pumps up to 310-gallon per hour at 5-feet depth.

From the Manufacturer

The Wayne CWS50 1/2-Horsepower shallow well jet pump is for wells up to 90-Feet deep. At 50 PSI it pumps up to 310-Gallon per hour at 5-Feet depth.

Product Description

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO commitment is to produce pumps for the long term at the best value.

From the Manufacturer

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.

Product Description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 93501, 1/2 HP cast iron submersible sewage pump with tethered float switch, will pump up to 4800 gallons per hour. Equipped with 2-inch NPT discharge, will handle up to 2-inch solids and features a non-clogging vortex impeller. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

Amazon.com

From Superior Pump, this submersible sewage pump features a tethered float switch and a reliable 1/2-horsepower continuous-duty motor. Able to handle 2-inch solids, this large-capacity pump can lift water up to 25 feet and deliver flow rates up to 80 gallons per minute. Its cast iron body and non-clogging Vortex impeller ensure a long, low-maintenance life.

Submersible, non-clogging, large-capacity pump features durable cast iron housing (view larger).

Large Capacity Suited to Home and Commercial Applications

This dependable, submersible sewage pump is built to effectively handle a range of typical residential and commercial applications. Whether material is being moved from a basin to a drainage field or from a basin up to sewer or septic lines, the pump’s large discharge design easily handles 2-inch solids and high-capacity pumping. It is powerful enough to lift water up to 25 feet vertically. When used on a level plane, it can move up to 80 gallons per minute. This sewage pump delivers a maximum force of 10.83 psi.

Continuous-Duty Motor for Reliable Performance

Behind the pump’s consistent performance is a continuous-duty split-capacitor motor. This 7.6 amp, 1/2-horsepower motor operates at speeds up to 1,750 rpm and can produce 912 watts of power. It is thermally protected and rated for 180 degrees Fahrenheit (82 degrees Celsius).

Cast Iron Design with Non-Clogging Vortex Impeller

Thanks to a dependable, non-clogging Vortex impeller made of cast aluminum, as well as rugged cast iron housing and base construction, this Superior Pump unit can be trusted to withstand continuous use in tough environments. For added durability, this pump features stainless steel fasteners and a baked-on powder-coat finish. Its tethered float switch relies on a wide-angle, mechanical, pump-mounted float that’s constructed of glass-reinforced nylon.

The 10-foot, water-resistant power cord makes it easy to connect the pump to a power source. This sewage pump is UL/C-UL listed and CSA certified for safety and dependability.

What’s in the Box

93501 sewage pump

See larger image.

93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch

At a Glance

• Powerful, 1/2-horsepower continuous-duty split-capacitor motor
• Handles 2-inch solids and high-capacity pumping
• Moves up to 80 gallons per minute
• Can push water up to 25 feet vertically
• Cast aluminum, non-clogging Vortex impeller
• Durable, cast iron housing and base for long life

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

Product Description

FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity

From the Manufacturer

Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.