We spent many hours on research to finding 2 hp compressor duty motor, reading product features, product specifications for this guide. For those of you who wish to the best 2 hp compressor duty motor, you should not miss this article. 2 hp compressor duty motor coming in a variety of types but also different price range. The following is the top 10 2 hp compressor duty motor by our suggestions
903 reviews analysed
1. NEW 2 HP SPL Compressor Duty Electric Motor, 3450 RPM, 56 Frame, 5/8" Shaft Diameter,120/240 VOLT
Feature
- 2 HP SPL COMPRESSOR DUTY ELECTRIC MOTOR, ODP (OPEN DRIP PROOF) FOR DRY INDOOR ENVIRONMENTS
- 1 PHASE, 56 FRAME, 3450 RPM, 120V/240VAC, 5/8″ SHAFT DIAMETER
- CAPACITOR START AND CAPACITOR RUN CONTINUOUS DUTY COMPRESSOR MOTOR
- Amperage: (7.5 FLA @ 240V) (15 FLA AT 120V), Voltage: 120V/240V (NOT SUITED FOR 208V INCOMING)
- CCW (COUNTER CLOCKWISE ROTATION) WHEN VIEWED FROM SHAFT END.
2. New WEG 2HP Electric Motor Fan Pump Compressor General purpose 56 frame 3495 RPM 1 phase 115/208-240VAC
Description
2 hp – 56 Frame – 3495rpm – Single Phase – 115 / 208-230volt – 5/8″ shaft diameter – 1.874″ shaft length Please see attached Pics for motor dimensions and frame dimensions Technical Info: Horsepower: 2 HP Amperage: 11.0 fl amps at 230v Phase: One / Single Phase 2 pole Voltage: 115 / 208-230 RPM: 3495 Torque: 3.01 lb.ft Base: Reinforced fixed base Frame: 56 Shaft Diameter: 5/8″ Keyed shaft Shaft Length: 1.874″ Rotation: Reversible CW or CCW Rotation Frequency: 60hz Service Factor: 1.00 @ 230v Enclosure: ODP Open Drip Proof (internally fan cooled) Construction: Rolled Steel Overload: Yes – Manual reset button Efficiency: (100%) 70.0 Weight: 41 lbs
3. 2 HP SPL 3450 RPM, 56 Frame, 120/240V, 15/7.5Amp 5/8" Shaft, Single Phase NEMA Air Compressor Motor – EM-02
Description
Features: Reduced starting amperage design to ensure the reduced voltage starting at rated load. Equipped with UL approved Manual thermal overload, capacitors and high quality ball bearings to ensure the lifetime. Open dripproof is better used in environment that are relatively clean and dry environments. Special design for Air Compressor duty. Motor is Non-Reversible CCW (Counter Clockwise) ONLY. Additional Note: 120 volt Wire setting default, In order for it to be 240 volt conversion a couple of the the factory wired needed to be moved to different positions. Check the listing image for more detail.
4. Mophorn 1 Hp Electric Motor 1725 RPM 11.2-5.6 A Single Phase Motor AC 115V 230V Air Compressor Motor 56C Frame Suit for Agricultural Machinery and General Equipment
Feature
- 【Single Phase】- The motor is 1HP single phase electric motor, features with 115/230V voltage and 13.6/6.8A full load amperage.
- 【Fitted Frame and Shaft】- With 56C frame, the electric motor also has 1.875 inch length and 0.625 inch diameter keyed shaft.
- 【High Speed】- The electric motor features 1725RPM rated speed and 1800RPM synchronous speed. High speed meets your different needs.
- 【Fan Cooled】- Our electric motor is TEFC (Totally Enclosed Fan-Cooled) motor. A built-in fan helps to dissipate heat and prevent the motor from overheating.
- 【Universal Motor】- Universal used for the matching of water pumps, agricultural machinery and general equipment.
5. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
6. NEW 3.7HP COMPRESSOR DUTY ELECTRIC MOTOR, 56 FRAME, 3450 RPM, 5/8" SHAFT DIAMETER, NEMA RATED MOTOR, REPLACES 5HP SPL MOTORS RATED 15-17AMPS
Feature
- NEW 3.7HP COMPRESSOR DUTY MOTOR, SINGLE PHASE, 56 FRAME, 3450RPM, 5/8″ SHAFT DIAMETER
- IF THE MOTOR YOU ARE REPLACING SHOWS HP AS (5HP SPL) OR JUST (SPL) AND IS ALSO RATED BETWEEN 15-17 FULL LOAD AMPS AT 230V, THIS MOTOR WILL REPLACE YOURS
- CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE
- 2.25″ SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR
- WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED
7. 3 HP 3450 RPM Electric Motor COMPRESSOR DUTY 56 Frame 1 Phase 5/8 Shaft
Feature
- 3 HP SPL 3450 RPM, 15.0 amps 230V 60hz.
- Open Drip Proof – Ball Bearings – Service Factor 1.0
- Non-Reversible – CCW Rotation facing the shaft
- U56 Frame
- NEMA 56 Frame – Flat Rigid base mount
- Shaft: 5/8″ diameter x 1 7/8″ This replacement compressor motor is commonly used on the small “home/shop” air compressors.
8. Leeson Farm Duty Electric Motor – 2 HP, 1,725 RPM, 230 Volts, Single Phase, Model Number M6K17FB4
Description
‘Depending on the application, choose a single – or 3-phase AC farm duty electric motor with different HP, voltage and RPM range. Here is some additional information about Leeson High Torque Farm Duty Motor. Hp: 2, Voltage: 230, Phase: 1.’
9. NEW 5HP 184T FRAME WEG ELECTRIC MOTOR FOR AIR COMPRESSOR 1750 RPM 230V 21.5 AMP
10. Mophorn Electric Motor 2Hp 143 5T Frame Single Phase Motor 1800 RPM 60Hz Air Compressor Motor AC 115V 230V Suit for Agricultural Machinery and General Equipment
Feature
- 【POWERFUL AC MOTOR】- Compact and small sized AC motor featuring output 2HP, 143/5T Frame and single phase. Robust and reliable metal material shell protect the inner circuit from thermal overloading.
- 【HIGH SPEED 1725PM】- The farm duty motor designed with rated speed: 1800RPM to be with high working efficiency. Runs with 2HP. Shaft Diameter: 7/8″ (2.5cm), Shaft Length: 2.36″ (6cm).
- 【TOTALLY ENCLOSED FAN】- Big fan at one end cools the motor in hours’ running, even in dusty or damp environments. Reducing energy costs or overheads, reducing running temperature, increasing winding lifetimes.
- 【MANUAL OVERLOAD PROTECTION】- Gasketed capacitor housing and conduit boxes provide protection in all environments. Low temperature manual overload protector protects against extreme overload.
- 【MOUNTING BRACKET INCLUDED】- Robust mounting bracket in included in the package, used for enlarging motor’s stability and reducing any friction. Ball bearing system is also applied for multiple applications.
Conclusion
By our suggestions above, we hope that you can found 2 Hp Compressor Duty Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!
