Nowadays, there are so many products of hp 2.5in 512gb solid state drive in the market and you are wondering to choose a best one.You have searched for hp 2.5in 512gb solid state drive in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hp 2.5in 512gb solid state drive which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
870 reviews analysed
1. HP SSD S700 Pro 2.5" 512GB SATA III 3D NAND Internal Solid State Drive (SSD) 2AP99AA#ABL
Feature
- New 3D NAND technology and advanced wear balancing algorithm for higher durability @0. 6 Drive writes per day
- An industry-top-leading reliability (MTBF) 2M hours, and endurance (TBW) 80 to 650 TBW
- Up to 1GB DRAM cache for better multi-tasking and durability
- Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
- Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories
Description
HP SSD S700 Pro Series delivers compact storage and optimized performance for traditional and innovative small-form-factor and embedded platforms in 3 capacity sizes: 128GB、256GBand 512GB .
The case 2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD), and enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs. This design makes it ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet; such as, notebook, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.
features
• High performance
• Low power
• Increased system responsiveness
• High reliability
• Small form-factor
• Minimum weight
• Enhanced ruggedness
2. HP 6MC15AA#ABC 1TB S700 2.5" SATA III 3D NAND Internal Solid State Drive …
Feature
- New 3D NAND Technology and advanced wear balancing algorithm for higher durability @0.6 Drive Writes Per Day
- An industry-top-leading Reliability (MTBF) 2M hours, and Endurance (TBW) up to 500 TBW
- Higher Order LDPC Error Correction for high speed parallel decoding and real time error correction to ensure data integrity and security
- All Metal Body – heat dissipation and durability in a PC environment
- Works on all Windows PC, Full compatibility with HPdst.exe (HP Software Pre-installation Environment). Ideal upgrade for HP PCs
Description
Specifications Mfr Part Number: 6MC15AA#ABC Capacity: 1TB Form Factor: 2.5 inch Interface: SATA III 6 Gb/s NAND Flash: 3D TLC Latency: Read – 0.022ms; Write – 0.299ms Performance: Sequential Read Speed: Up to 561 MB/s Sequential Write Speed: Up to 523 MB/s 4K Random Read Speed: Up to 82K IOPS 4K Random Write Speed: Up to 81K IOPS MTBF: 2.0 Million Hours Power Consumption: Idle: 0.34W Active: 2.74 W Max Shock Resistance: 100G / 6 msec Max Vibration Resistance: 3.1 GRMS (2-500 Hz) Temperature: 0°C to 70°C (Operating); -40°C to 85°C (Storage) Thickness: �‰¤ 7 mm Dimensions: 100.2 x 69.8 x 7.0mm Weight: �‰¤ 80.0 g
3. HP Zbook 15 G3 Mobile Workstation, 15.6" FHD Display, Intel Core i7-6820HQ 3.6GHz, 16GB RAM, 512GB NVMe SSD + 2TB 2.5" HDD, NVIDIA Quadro M2000M, HDMI, Thunderbolt, Wi-Fi, Bluetooth, Windows 10 Pro
Feature
- Intel Core i7-6820HQ (8M Cache, up to 3.6 GHz) – 512GB PCI NVME Solid State Drive (SSD) with 2TB Storage HDD – 16GB DDR4 SDRAM, 2133MHz SODIMM
- 15.6″ Full HD IPS (1920 x 1080) Anti-Glare, Non-Touch Display with NVIDIA Quadro M2000M Graphics with 4GB VRAM
- Intel Dual Band Wireless-AC (2×2) 8265, Bluetooth Version 4.2 – Fingerprint Reader – Full-size Backlit Keyboard
- 1 RJ-45
- 1 USB 3.0 (charging)
- 1 VGA
- 1 power connector
- 2 USB Type-C (Thunderbolt 3, DisplayPort 1.2, USB 3.1)
- 1 HDMI 1.4
- 2 USB 3.0
- 1 stereo microphone-in/headphone-out combo
- Windows 10 Pro 64-bit – 720p HD Webcam with Dual Array Microphone – Energy Star Certified
Description
Modern Versitility for your Modern Needs
Thin at 1.0″ and weighing 5.7 lb, the 15.6″ ZBook G3 Mobile Workstation from HP is designed for mobile professionals who require a versatile system with powerful processing and graphics as well as simple scalability that can handle a wide variety of functions. The 15.6″ SVA anti-glare display features a Full HD 1920 x 1080 native resolution. The Full HD display also features LED-backlighting and a 16:9 aspect ratio. The dedicated NVIDIA Quadro M2000M graphics card has 4GB of discrete GDDR5 RAM and delivers a sharp, clear picture. You’ll also be able to output video to an external display at resolutions up to 5120 x 2880 using the system’s HDMI and dual Thunderbolt 3 ports. Gigabit Ethernet and 802.11 ac Wi-Fi are also built-in for wired and wireless networking and Bluetooth 4.2 technology will also allow you to connect additional compatible peripherals.
Key Specifications:
– Intel Core i7-6820HQ Processor (8M Cache, up to 3.6 GHz)
– Windows 10 Pro 64-bit
– 15.6″ Full HD IPS (1920 x 1080) Anti-Glare, Non-Touch Display
– 512GB PCI NVME Solid State Drive with 2TB Storage HDD – 16GB DDR4 RAM
– NVIDIA Quadro M200M Graphics with 4GB VRAM
– Intel Dual Band Wireless-AC (2×2) 8265, Bluetooth Version 4.2
– 720p HD Webcam with Dual Array Microphone,
– Backlit, Spill-Resistant Keyboard with Full Number Pad
– 1 RJ-45; 1 USB 3.0 (charging); 1 VGA; 1 power connector; 2 USB Type-C (Thunderbolt 3, DisplayPort 1.2, USB 3.1); 1 HDMI 1.4; 2 USB 3.0; 1 stereo microphone-in/headphone-out combo
– ENERGY STAR Certified
4. HP SSD 2DP98AA#ABC 250GB S700 2.5 inch Retail
Feature
- HP SSD S700 Pro Series delivers compact storage and optimized performance for traditional, innovative small-form-factor, and embedded platforms.
- 2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD).
- Enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs.
- Ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet.
- Supports: notebooks, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.
Description
Product Specifications:
Capacity
250GB
Components
3D TLC NAND Flash
Read and Write IOPS
Random 4 KB reads: Up to 55 K IOPS
Random 4 KB writes: Up to 80 K IOPS
Bandwidth Performance
Sustained sequential read: Up to 555 MB/s
Sustained sequential write: Up to 515MB/s
SATA 1.5 Gb/s ,3 Gb/s and 6 Gb/s interface
ATA/ATAPI-7
SSD-enhanced S.M.A.R.T. ATA feature
Native Command Queuing (NCQ) command set
Data set management command Trim attribute
Form Factor
Full-sized 2.5inch SSD
Power Management
5 V 2.5inch SSD power supply
2.5inch SSD interface power management
Power (Mobile Mark 2007 Workload)
Idle:340 mW(TYP)
max: 1.38W (TYP)
Temperature
Operating: 0C to 70C
Non-Operating: -40C to 85C
Shock (operating and non-operating)
100 G/6 msec
Vibration(operating and non-operating)
3.1G RMS (2-500 Hz)
Latency
Read: 0.030ms (TYP)
Write: 0.188ms (TYP)
Reliability
Uncorrectable Bit Error Rate (UBER): 1 sector in 10^16bits read
Mean Time Between Failures (MTBF): 2,000,000 hours
Certifications and Declarations
UL
CE
FCC
RoHS
Item Dimension (L inchxW inchxH inch)
4 x 3 x 1
Weight
1.00 lb
Warranty Information
3 years limited
5. HP EX900 M.2 1TB PCIe 3.1 X4 Nvme 3D TLC NAND Internal Solid State Drive (SSD) Max 2100 Mbps 5Xm46Aa#ABC
Feature
- M.2 2280, HP controller Offering with 4 flash memory channels that support PCIe 3.1 x4 and NVMe 1.3 sequential read/write speeds up to 2, 100 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW
- Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
- Works on all Windows PC, Full compatibility with host.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
- Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories. Not intended for use in HP workstations
Description
M.2 2280, HP controller offering with 4 flash memory channels that support PCIe 3.1 x4 and NVMe 1.3 sequential read/write speeds up to 2, 100 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security. Works on all Windows PC, Full compatibility with HP’s.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs. Manufactured to HP High quality standards and fully tested and certified in HP laboratories. Not intended for use in HP workstations
6. HP SSD S700 Series 120GB 2.5 Inch SATA3 Solid State Drive, Bulk (3D TLC)
Description
Specifications Mfr Part Number: 2DP97AA#ABC capacity: 120gb form factor: 2.5 inch interface: SATA 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash: 3D TLC latency: read – 0.032ms; write – 0.210ms performance: Sequential Read speed: up to 561 MB/s sequential Write speed: up to 511 MB/s 4K random read speed: up to 71K IOPS 4K random Write speed: up to 82K IOPS MTBF: 2.0 million hours power consumption: idle: 340 mw (typ) Max: 1.38 W (TYP) shock: operating: 100 G/6 msec Non-operating: 100 G/6 msec ‹vibration: operating: 3.1G rms (2-500 Hz) Non-operating: 3.1G rms (2-500 Hz) temperature: 0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness: ‰¤ 7 mm Dimensions: 100.2 x 69.8 mm Weight: ‰¤ 80.0 g
7. HP Intel DC S3610 SSD 1.6TB SATA 6Gb/s MLC 2.5-Inch Internal Solid State Drive – SSDSC2BX016T4P (804612-004)
Feature
- Provides the necessary performance and endurance for mixed and write-intensive workloads
- Intel P/N: SSDSC2BX016T4P (Similar to Original Intel P/N: SSDSC2BX016T401)
- 20nm HET MLC NAND flash memory type
- Compatible with Optane SSD boot drive as well as PC, NAS, SAN, and pro laptops
- Backed by a 5-year warranty from reseller
Description
NOTE: This is brand new HP/Intel DC S3610 Series 1.6TB SSD (804612-004 / HP Model LK1600GEYMV), it is as same as SSDSC2BX016T4P. It’s fully company with any server, desktop or laptop. Not compatible only with HPE Servers.
HP / Intel DC S3610 Series SSDSC2BX016T4P (HP Model # LK1600GEYMV / PN: 804612-004) 1.6TB 2.5-inch 7mm SATA III MLC Internal Solid State Drive (SSD). Upgrading your PC, Laptop, or Server with an Intel SSD is the most economical way to breathe new life into an aging PC. The Intel 1.6TB SSD reads, writes, and multi-tasks at incredible speeds, enhancing boot-up speed, application loading, and multi-tasking performance. It’s more than an upgrade, it’s a complete transformation of your PC or server.
TECHNICAL INFORMATION:
STORAGE CAPACITY: 1.6 TB
INTERFACE TYPE: SATA-3 6GBPS
FORM FACTOR: 2.5 INCH
LITHOGRAPHY: 20 NM
NAND FLASH MEMORY TYPE: 20NM MULTI-LEVEL CELL
SHOCK: 1000 G / 0.5 M SEC
MTBF: 2000000 HOURS
Best-Fit Applications:
Performance laptops or Macbooks
Workstations
Small form factor PCs
Databases
24×7 enterprise environments
Servers
Cloud computing
Any laptop, business laptops, desktop or server that accepts 2.5″x7mm SATA high performance drives. Custom built desktop PCs, Macs, Alienware, XPS, Latitude, G3, G5, G7, and Inspiron Systems.
HP Proliant Series:
Proliant BL Series | Proliant DL Series | Proliant ML Series | Proliant SL Series and more.
PowerEdge Series:
PowerEdge C | PowerEdge M | PowerEdge R | PowerEdge T and more.
8. HP 60000-055 SSD S700 Series 250GB 2.5 Inch SATA3 Solid State Drive, Bulk (3D TLC)
Description
Specifications Mfr Part Number: 2DP98AA#ABC capacity: 250gb form factor: 2.5 inch interface: sata 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash: 3D TLC latency: read – 0.026ms; write – 0.223ms performance: Sequential Read speed: up to 562 mb/s sequential Write speed: up to 516 mb/s 4K random read speed: up to 85K IOPS 4K random write speed: up to 90K IOPS MTBF: 2.0 million hours power consumption: idle: 340 mw (typ) Max: 1.38 W (TYP) shock: operating: 100 G/6 msec Non-operating: 100 G/6 msec ‹vibration: operating: 3.1G rms (2-500 Hz) Non-operating: 3.1G rms (2-500 Hz) temperature: 0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness: ‰¤ 7 mm Dimensions: 100.2 x 69.8 mm Weight: ‰¤ 80.0 g
9. HP 512GB SSD SATA-3 Interface 2.5 Inch Form Factor, 795962-001 (2.5 Inch Form Factor)
Description
HP 795962-001 512GB solid-state drive (SSD) – SATA-3 interface, 2.5-inch form factor back Order
10. HP D8F30AA 512 GB 2.5" Internal Solid State Drive
Description
Solid State Drives (SSDs) are fast becoming a real force with respect to storage in the computer industry. With no moving parts, storage is no longer bound by mechanical barriers to higher performance. HP SSDs for workstations offer overall performance typically beyond that of SAS 15k rpm HDDs (Hard Disk Drives). back Order
Conclusion
By our suggestions above, we hope that you can found Hp 25In 512Gb Solid State Drive for you.Please don’t forget to share your experience by comment in this post. Thank you!
