Finding your suitable readers for 1978 mercury 90 hp wiring harness is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 1978 mercury 90 hp wiring harness including detail information and customer reviews. Let’s find out which is your favorite one.
769 reviews analysed
1. Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse for Off Road Lights LED Work Light,2 years Warranty
Feature
- Universal fit: compatible with all automobiles, boats and devices equipped with a 12V power source
- CIRCUIT PROTECTION: Power relay-safety protection and conversion circuit. Blade fuse protects the circuit when overcurrent or short circuit occurs.
- ILLUMINATED SWITCH: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing.
- TWO AVAILABLE LEADS: With 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable.
- PACKAGE INCLUDE:1 x Wiring Harness Kit ,1 x Instructions,
Description
Product Features:
10ft wiring harness, 2 sets of connectors to light fixtures
illuminated on/off toggle switch – can easily turn on/off the lights.
Inline blade fuse & relay – multiple safety protection.
Note:
Maximum Wattage: 180W; Max Ampere: 15A
Operating Voltage: 12V DC Power
Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
2. CDI Electronics 414-3369 Mercury/Mariner Wiring Harness – 2/4 Cyl (1976-1981)
Feature
- Mercury/Mariner Wiring Harness
- Fits the following engines: 1977-1981 20 HP (2 cylinder), 1976-1979 50, 80 and 85 HP (4 cylinder)
- Replaces part numbers: 84-76295, 84-76295A 1, 84-73447, 84-73447A 1, 84-64997, 84-73369, 84-73369A 1
- Harness exits through the side of the lower cowling
- Check manufacturer’s recommended part numbers to ensure a proper fit for your application
Description
The CDI Electronics 414-3369 Mercury/Mariner Wiring Harness fits the following engines: 1977-1981 20 HP (2 cylinder), 1976-1979 50, 80 and 85 HP (4 cylinder). Replaces part numbers: 84-76295, 84-76295A 1, 84-73447, 84-73447A 1, 84-64997, 84-73369, 84-73369A 1. Harness exits through the side of the lower cowling.
3. Water Pump Impeller for Mercury Outboard Motor 30HP 35HP 40HP 45HP 50HP 60HP,65HP 70HP Compatible Part Number 47-89983T
Feature
- This aftermarket Impeller replace Mercury Mariner outboard motors 47-89983/47-8983T/47-65959/47-20268.
- Water pump impeller meets or exceeds OEM standards,TS16949 certified manufacturer.Requires only simple hand tools for installation.
- Water pump impeller made of upgraded ABS plastic and brass,quality assure and have 2 years warranty.
- Water pump impeller same as factory old part and easy to install,direct replacement.
- Water Pump Impeller for Mercury Outboard Motor 30 HP 1271884-1448139,30 HP JET C159200-G589999,35 HP 1217222-1448139 & 1571114-UP,40 HP 2 cylinder 1224481-1476509 & 2874704-6445653,40 HP 4 cylinder C159200-UP,45 HP 1279685-1476509 & 5531630-UP,50 HP 1421113-4962055,50 HP 4 cylinder 4962056-UP,50 HP 3 cylinder 6428681-D000749,60 HP 6428681-D000749,65 HP 3 cylinder 3293184-4571651,70 HP 3 cylinder 4571652-B110053.
Description
This is a new replacement Water Pump Impeller for Mercury 30-70hp Outboard Motors.
Replaces part number: 47-89983 / 47-89983T / 47-65959 / 47-20268
Fits:
30 HP 1271884-1448139
30 HP JET C159200-G589999
35 HP 1217222-1448139 & 1571114-UP
40 HP 2 cylinder 1224481-1476509 & 2874704-6445653
40 HP 4 cylinder C159200-UP
45 HP 1279685-1476509 & 5531630-UP
50 HP 1421113-4962055
50 HP 4 cylinder 4962056-UP
50 HP 3 cylinder 6428681-D000749
60 HP 6428681-D000749
65 HP 3 cylinder 3293184-4571651
70 HP 3 cylinder 4571652-B11005
Price for one water pump impeller
4. Quicksilver Water Pump Repair Kit 8M0113799 – Outboards – for 135 HP Through 200 HP, 4-Cylinder Mercury Verado Outboards
Feature
- Expansive kit to replace water pump impeller, upper and lower housing, drive key, face plate, gaskets and water tube and seals.
- For select Mercury and Mariner 40 hp through 125 hp 4-stroke outboards.
- One of the most complete kits available to repair 4-stroke outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions.
- Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Description
Water pump repair kit 8M0113799 is for Mercury or Mariner 40 hp through 125 hp 4-stroke outboards. The kit includes water pump impeller, upper and lower housing, drive key, face plate, gaskets and water tube and seals. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
5. Li Bai CDI Module Switch Box for 50-275 HP Mercury Outboard Motor 332-7778A12 332-7778A9 332-7778A6 332-7778A3 332-5524A1 332-7778A1 332-7778A7
Feature
- Replace Part Number: 332-7778A12 332-7778A9 332-7778A6 332-7778A3 332-5524A1 332-7778A1 332-7778A7
- Condition: 100% Brand New and High Quality Switch Box CDI Power Pack. Easy to install and without any installation instruction.
- Material: Be made of High Quality Aluminum Material. Working Voltage: 6.5 x 5.2 x 2.2 inches
- Applications: Mercury 50hp 3cyl 6428681-0D000749 Mercury 60hp 3cly 6428681-0D000749 Mercury 65hp 4382057-4571651 Mercury 70hp 4571652-5128279
- As an honest seller, we focus on QUALITY and SERVICE. If there is any question, feel free to contact us. We will offer the best service for you. Thank you very much!
Description
Instructions:
1)If the Black Ground Wire is Not Already Connected to the CDI Box,
Fasten to One of the 4 Mounting Holes on the Outside of the Box.
2)Fasten the Other End of This Black Wire to a Good Ground Spot on the Engine.
3)If the Engine Uses an Orange Colored Lead That is Connected to the Box, Connect This to
the “Black/Yellow” Stud on the New Box.
Part Numbers:
332-7778A12
332-7778A9
332-7778A6
332-7778A3
332-5524A1
332-7778A1
332-7778A7
Applications:
Mercury 50hp 3cyl 6428681-0D000749
Mercury 60hp 3cly 6428681-0D000749
Mercury 65hp 4382057-4571651
Mercury 70hp 4571652-5128279
Mariner 70hp 5128280 – Later
Mercury 70hp 5579016-6428680
Mercury 70hp 3cly 0C272000-0D283221
Mercury 75hp 3cyl 0C272000-0D283221
Mercury 80hp 3cyl 0A996142-0C221999
Mercury 90hp 6cyl 5299506 – Later
Mercury 90hp 3cyl 0A996142-0D283221
SportJet 90hp 0E023150-0E095087
Mercury 105hp Jet 0D082000-0G303045
Mercury 115hp 6cyl 5314656- Later
Mercury V-135 0A904646 – Later
Mercury 140hp 5327663 – Later
Mercury 140hp Jet 0D082000-0G960499
Mercury V-150 4868998-5129429
Mercury V-150 5129480-0G960499
Mercury V-150 XR2 6616991-0A904645
Mercury XR4, Magnum II 0B242885-0D819999
Mercury V-150 XR6 0D82000-0G960499
Mercury V-175 4301235-5180108
Mercury V-175 5180109-0G960499
Mercury V-175 EFI 5180109-0G960499
Mercury V-175 XR1 5180109-0G960499
Mercury V-200 4839034-5158928
Mercury V-200 5158929-0G960499
Mercury V-200 XR1 5158929-0G960499
Mercury V-220 0B117316 – Later
Mercury V-225 5628028 – Later
6. CDI Switch Box Compatible with 50-275 HP Mercury Outboard Motor 332-7778
Feature
- Perfectly replaces part numbers: 332-7778A12, 332-7778A9, 332-7778A6, 332-7778A3, 332-5524A1, 332-7778A1, 332-7778A7
- The CDI module switch box for Mercury Outboard comes with ground wire
- Constructed from premium material for superior performance and functionality
- Please make sure your original part number matches ours for exact fitment
- Quality product with hassle free after-sale services offered by KEMIMOTO
7. Boat Motor 889575 Temperature Sensor Assembly for Mercury Mariner Outboard Engine 30HP 40HP 50HP 60HP 4-Stroke
8. Nilight 2PCS 18W 1260lm Spot Driving Fog Light Off Road Led Lights Bar Mounting Bracket for SUV Boat 4" Jeep Lamp,2 years Warranty
Feature
- SUPER BRIGHT SPOT BEAM: High-quality LED chips emits bright white light
- Concentrated spot beam illuminates to further distance and lumen is 1260LM
- ADJUSTABLE MOUNTING BRACKET: The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.
- BETTER HEAT DISSIPATION: Special designed die-cast aluminum alloy cooling fins effectively extend the lifespan to over 30,000 hours.
- WATERPROOF RATE: IP67
- waterproof up to 3.3 feet of water for 30 minutes and effectively dustproof.
- PACKAGE INCLUD: 2PCS 18W LED Light Bars and Mounting Brackets
- this product is the universal fit. It fit all the vehicles.
Description
Specification:
LED Power: 18W (6 x 3W High Intensity LED)
Beam Pattern: Spot Beam; Lumen: 1260LM
Input Voltage: 9-30V DC (fits 12V, 24V vehicles)
Working Lifespan: Over 30,000 hours
Working Temperature: -40~85 degrees Celsius
LED Color Temperature: Pure White 6000K-6500K
Material: 6063 Aluminum Profile, High quality Led Chips, PC Lens
Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive.
Certifications: CE, FCC and RoHS
Applications:
Off Road Lighting: Back Up Light, ATV, SUV, Truck, Trailer, Forklift, Trains, Boat, Outdoor lighting, etc.
Other Lighting: Excavator, Dozer, Road Roller, Crane, Mining, Tractor, Harvester, Grain Drill, Fire engine, Rescue Vehicle, etc.
Household Lighting: Garden, Backyard, Garage, Indoor Lighting. (Note: Use a voltage transformer/converter to convert the AC 110-120V to DC 12V.)
Note:
They are aftermarket parts. NOT D.O.T. approved. Do not use if D.O.T. is required. For off road use only.
Before installing this product, please check your state/provincial and local/municipal laws and regulations.
9. CDI Electronics 474-9550 Mercury/Mariner Wiring Harness Boatside (1968-1981)
Feature
- Mercury/Mariner Wiring Harness
- Fits 1968-1981 engines using 414-2770, 414-3369, 414-5532 and OEM harnesses
- Replaces part numbers: 84-822253A20, 84-822253T20, 45876A10, 45876A15, 45876A20
- Harness exits through the side of the lower cowling
- Check manufacturer’s recommended part numbers to ensure a proper fit for your application
Description
The CDI Electronics 474-9550 Mercury/Mariner Wiring Harness Boatside fits 1968-1981 engines using 414-2770, 414-3369, 414-5532 and OEM harnesses. Replaces part numbers: 84-822253A20, 84-822253T20, 45876A10, 45876A15, 45876A20. Harness exits through the side of the lower cowling.
10. Metra Reverse Wiring Harness 71-7901 for Select 1990-up Mazda Vehicles Into OEM Radio
Description
Provides Pocket With Recessed Mounting Of A Din Radio Or An Iso Din Radio Using Metra Patented Iso Quick Release Brackets. All Necessary Hardware For Easy Installation. Comprehensive Installation Manual. Metra Patented Quick Release Snap-In Iso Mount System With Custom Trim Ring. Includes Parts For Installation Of Double Din Radios Or Two Single Din Radios. Comprehensive Instruction Manual.
Conclusion
By our suggestions above, we hope that you can found 1978 Mercury 90 Hp Wiring Harness for you.Please don’t forget to share your experience by comment in this post. Thank you!
