The Best Shark Bite Cap

Cap off pipe in seconds with the SharkBite Push-to-Connect 3/4-Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite End Cap is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

PROCURU Push-Fit Fitting provides super easy, safe, and trouble-free solution to joining pipe of various materials including Copper, PEX, and PVC. No installation tools is necessary: NO solder, NO torch, NO wrench, NO glue! Meets and exceeds the latest plumbing and building codes, PROCURU Push-Fit is specified and recommended by the industry’s leading experts. Pack of 10 per order.

SharkBite PVC cap is the most efficient PVC pipe cap due to its push-to-connect design. These PVC pipe plugs make a great pipe plug for stub outs and pressure testing a home or PVC water line as they take no time to cure after installation.

Push lock is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, pipe together. It features easy to disconnect and reconfigure the system with no soldering, clamps, unions or glue required, Its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring, Coupling is removable and reusable installation. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is rated up to 200 psi and 200°Fahrenheit.

CUT. PUSH. DONE. Cap off pipes in seconds with the SharkBite Push-to-Connect 1/2 Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless-steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

XFITTING – The Push-Fit connection system it’s the easiest and fastest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Just push connect by hands, within 1 minutes to finish installation, makes our life more efficient, fast, save time and strength and your money. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get a grip on your next plumbing project. · Instant Push-Fit connection for increased ease-of-use. · No soldering, clamps, unions, or glue required. · Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination. · Integral tube liner for PEX installations, so no loose components, ensures secure, reliable connection.

SharkBite PVC cap is the most efficient PVC pipe cap due to its push-to-connect design. These PVC pipe plugs make a great pipe plug for stub outs and pressure testing a home or PVC water line as they take no time to cure after installation.

• INCLUDES: (4) 1/2″ End Cap, (1) 1/2″ Disconnect Clip, and (1) Push-Fit Installation Tips.
• Integral tube liner for PEX installations which means no loose connections.
• Made of Lead Free DZR (dezincification resistant) brass which provides a strong, durable fitting that is corrosion resistant.
• It’s the easiest way to join copper, CPVC or PEX pipe in any combination. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
• Lifetime Warranty.

Helpful Hints:
Do not attempt to insert the tubing into the stiffener while the stiffener is inside the fitting because the stiffener will not properly seat into the PEX. Remove the stiffener (using the disconnect clip and needle-nose pliers), and insert it into the PEX and then insert the PEX into the fitting. (Most people get a water tight seal without the stiffener so they elect not to use it.)

Product Description

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.

SharkBite uses high quality forged lead-free brass for their 3/4″ x 3/4″ brass ball valve with a single ball valve handle. Quick and Easy to attach to your water faucet project. SharkBite Ball Valve can be easily rotated after installation making it a cinch to shut off water in an emergency or work in tight spaces.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite 22186-0000LF Ball Valve w/ Integral SharkBite Connectors 3/4-Inch x 3/4-Inch FNPT Full Port Brass Lead Free

Product Description

Cap off pipe in seconds with the SharkBite Push-to-Connect 1/2-Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite End Cap is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.