7.4V nominal voltage for use with existing Fat Shark goggles and fits into head strap like standard Fat Shark battery packs. Large capacity when used with high capacity cells (batteries not included).Batteries should be removed and charged via a dedicated 18650 style charger.

Specifications

• Output Voltage:7.4v
• LED Indicator: Available
• Dimensions:102x71x26mm
• Weight: 72g

Includes

• 1x FSV1814 (Battery Case)

Tattu 2500mAh 2S1P Fatshark Goggles Battery has high quality, the weigh only about 102g, it can make your Goggles for a long time, 2500mAh battery is a great Fatshark Goggles replacement lipo battery.

Tattu 2500mAh 2S Lipo Battery Specs:
Capacity: 2500mAh
Voltage: 7.4V (2S)
Net Weight (±20g): 102g
Size: 73.7*38.1*18.6 mm
Connector Type: DC3.5mm

Tattu 2500mAh 2S Lipo Battery Usage:
Special designed for Fatshark Goggles.

Our Advantage:
1. Your orders will be dispatched via Amazon center directly.
2. Fast shipping and excellent local after-sale service guaranteed in USA.
3. Energy Density:Special adapted to each UAV type and RC car/boat/heli type. Very High according to capacity/weight.
4. Low IR: Provides stable voltage until the end of your mission.
5. Safety: Gens ace and its’ partners full fill the ISO9001, ISO14001, standards.

Details:
Brand: Gens ace
Capacity(mAh): 2200mAh
Voltage(V): 7.4V
Discharge Rate (C): 50C
Max Burst discharge Rate (C): 100C
Configuration: 2S1P
Net Weight(dev.20g): 130g
Length(dev.5mm): 87.2mm
Width(dev.2mm): 34mm
Height(dev.2mm): 20mm
Connector Type: Deans and XT60 Plug
Wire Gauge: AWG12#
Wire Length(mm): 120mm
Balancer Connector Type: JST-XHR

Overview
Gens Ace is one of the top rank RC battery brand in the market. With the effort of 200 professional engineers and technicians, Gens ace always provides batteries with exquisite technology for various RC Models such as RC cars, RC planes, RC helis, RC boats, etc.

Features:
1.Superior Japan and Korea Lithium Polymer raw materials.
2.Automatic stacking technology, better performance
3.Strict matching progress, excellent consistency
4.Up to 200Wh/kg energy density
5.Long cycle life (150 times minimum)

Notes:
1.Only if the demension, weight, voltage and plug match, then it will fit.
2.Don’t over charge exceed 4.2V and don’t over discharge below 3.7V
3.Don’t put it beside the high temperature condition and don’t throw it into fire or water
4.Check the battery condition carefully before using or charging
5.The connectors need to be soldered onto the wires. Please do not cut both wires at the same time to prevent short circuit when soldering.
6.For any questions, pls feel free to contact us through “Your Orders” tab of your Amazon account, we will respond within one business day

Compatible models:
Traxxas 1/16 VXL Models
Yeti Jr. 1/18th Scale RC Car
Team Associated 1/14 RC Car
Redcat Racing 1/12 1/16 RC Car

This high quality battery holder case can hold 2 18650 batteries which make 2*3.7V battery pack from alkaline cells.It can hold standard 18650 size batteries,either for alkascent or rechargable batteries, the black and red two wire design is great for easily soldering and connecting.

Battery Type: 2*3.7V 18650 Battery
Cable Length:15cm
Material: Plastic and Mental
Color: Black

Package includes:
4* 2slots 18650 battery holder with case cover
4* black battery strap

Basic info:
Type: Battery Storage Box with Pin
Material: ABS and Metal
Battery type: 18650
Colour: Black
Style: 4 Slots 18650 Battery
Size:79 x 22 x 78mm/ 3.11″ x 0.87″ x 3.07″

Description:
Advantage: The battery holders are made of high quality material. Small size, easy to carry. Easy and convenient to use.
Feature: The battery holder has three compartments or chambers for holding three 3.7V battery. It is easy to solder and conduct electricity!
Function: Keeping your standard or rechargeable batteries together and safe.

Package including:
4pcs 18650 Battery Storage Case 4 Slots with Pin

Prompts:
Batteries Not Included.
You had better use consumer type 18650 cell with button cap or sharp cap to get good electricity conductivity of positive and terminal of box.

Specification Volts: 7.4v
Capacity: 2000mAh
Cell Configuration: 2S
Max Burst Rate: 8C
Max Volts per Cell: 4.2V
Charge Rate: Max 5C with Balance
Plug Type: JST Plug
Dimensions: 77 x 44 x 11mm
Weight: 88 Gram

Packing Contents:
1* 7.4v 2000mah 8c battery

Compatible for:
Frsky ACCST Taranis Q X7 Transmitter

Take control of your batteries. Do you know how long that set of batteries will really last?? Is that battery still good?? Will this battery take a charge at all?? Answer those questions and take control of your batteries with the C3400.

How long will this set of batteries last in my device?? The C3400 will test your cells for actual capacity, not just what is printed on the label. This charger will actually put your batteries through a charge/test cycle and then display exactly their tested capacity. No more guessing how good those batteries are. For nearly all Li-ion NiMH and NiCd consumer cylindrical cells.

NiMH/NiCd sizes: AAAA, AAA, AA, A, C and SubC.
Li-ion sizes: 10440, 14500, 14650, RCR123A (17340), 17500, 17670, 18350, 18500, 18650, 19670 (protected 18650), 25500, 26500, 26650.

For Li-ion (Lithium ion) NiMH or NiCd rechargeable batteries.
Four indepentent channels can be programmed individually or all together.
Charge, discharge, condition or analyze one to four Li-ion, NiMH or NiCd rechargeable batteries.
Back lighted LCD Digitally displays capacity, voltage, time elapsed and current.
Adjustable charging rate from 200 to 2000 mA. (1000 mA max 4 channels)
Five modes of operation for each channel: Charge: Discharge: Discharge Refresh: Charge Test: Quick Test:
Negative delta V (-dV) full charge detection for NiMH/NiCd. CC/CV for Li-ion rechargeable cells.

Adapter Power Supply input: 100 – 240 VAC, 50 -60 Hz.
Adatper Power Supply output: 12Vdc 3.0A.
Charge current: maximum 2000 mA. (1000 mA max all 4 channels)
Maximum discharge current 1000 mA (700 mA for NiMH/NiCd)
Maximum Charging Capacity 20,000 mAh
Operating Temperature: 0 to 40 deg C

Includes:
C3400 Charger
Wall Adapter Power Supply
Manual

7.4V nominal voltage for use with existing Fat Shark goggles and fits into head strap like standard Fat Shark battery packs. Large capacity when used with high capacity cells (batteries not included).Batteries should be removed and charged via a dedicated 18650 style charger.

Specifications

• Output Voltage:7.4v
• LED Indicator: Available
• Dimensions:102x71x26mm
• Weight: 72g

Includes

• 1x FSV1814 (Battery Case)

Details:
Brand: Gens ace
Capacity(mAh): 2200mAh
Voltage(V): 7.4V
Discharge Rate (C): 50C
Max Burst discharge Rate (C): 100C
Configuration: 2S1P
Net Weight(dev.20g): 130g
Length(dev.5mm): 87.2mm
Width(dev.2mm): 34mm
Height(dev.2mm): 20mm
Connector Type: Deans and XT60 Plug
Wire Gauge: AWG12#
Wire Length(mm): 120mm
Balancer Connector Type: JST-XHR

Overview
Gens Ace is one of the top rank RC battery brand in the market. With the effort of 200 professional engineers and technicians, Gens ace always provides batteries with exquisite technology for various RC Models such as RC cars, RC planes, RC helis, RC boats, etc.

Features:
1.Superior Japan and Korea Lithium Polymer raw materials.
2.Automatic stacking technology, better performance
3.Strict matching progress, excellent consistency
4.Up to 200Wh/kg energy density
5.Long cycle life (150 times minimum)

Notes:
1.Only if the demension, weight, voltage and plug match, then it will fit.
2.Don’t over charge exceed 4.2V and don’t over discharge below 3.7V
3.Don’t put it beside the high temperature condition and don’t throw it into fire or water
4.Check the battery condition carefully before using or charging
5.The connectors need to be soldered onto the wires. Please do not cut both wires at the same time to prevent short circuit when soldering.
6.For any questions, pls feel free to contact us through “Your Orders” tab of your Amazon account, we will respond within one business day

Compatible models:
Traxxas 1/16 VXL Models
Yeti Jr. 1/18th Scale RC Car
Team Associated 1/14 RC Car
Redcat Racing 1/12 1/16 RC Car

This high quality battery holder case can hold 2 18650 batteries which make 2*3.7V battery pack from alkaline cells.It can hold standard 18650 size batteries,either for alkascent or rechargable batteries, the black and red two wire design is great for easily soldering and connecting.

Battery Type: 2*3.7V 18650 Battery
Cable Length:15cm
Material: Plastic and Mental
Color: Black

Package includes:
4* 2slots 18650 battery holder with case cover
4* black battery strap

Basic info:
Type: Battery Storage Box with Pin
Material: ABS and Metal
Battery type: 18650
Colour: Black
Style: 4 Slots 18650 Battery
Size:79 x 22 x 78mm/ 3.11″ x 0.87″ x 3.07″

Description:
Advantage: The battery holders are made of high quality material. Small size, easy to carry. Easy and convenient to use.
Feature: The battery holder has three compartments or chambers for holding three 3.7V battery. It is easy to solder and conduct electricity!
Function: Keeping your standard or rechargeable batteries together and safe.

Package including:
4pcs 18650 Battery Storage Case 4 Slots with Pin

Prompts:
Batteries Not Included.
You had better use consumer type 18650 cell with button cap or sharp cap to get good electricity conductivity of positive and terminal of box.

Product description:
18650 boxes, 4 14.8V, battery pack, battery, lithium battery, 18650
Box material: soft PP material
Spring: nickel plated steel
Rivet: Brass
Wire: 1007# 24AWG
Exposed wire length: 150mm(red and black cable)
Color: Black
External connection: two 150mm red and black cable
Remarks： 4 pack of 18650 lithium battery.
After the series output 14.8V. is installed on the battery, please do not touch the red black line.The screw can be fixed,and Screw not included

Product description:
18650 boxes, 1 3.7V, battery pack, battery, lithium battery, 18650
Box material: soft PP material
Spring: nickel plated steel
Rivet: Brass
Wire: 1007# 24AWG
Exposed wire length: 150mm(red and black cable)
Color: Black
External connection: two 150mm red and black cable
Package： 10 pack of 18650 lithium battery.
After the series output 3.7V is installed on the battery, please do not touch the red black line.The screw can be fixed,and Screw not included