Top 10 12V Wifi Rv Range Extender

Features:
 The next generation of WiFi, leading 802.11ac standard
 Water proof RJ45 connector, integrated passive Power over Ethernet (PoE)
 Passive PoE support for flexible deployment
 Provides high performance at a Long-Range Links, depending on its antenna
 Features up to 1000mW of power and an enhanced receiver design
 Robust weatherproof case withstands harsh outdoor conditions
 Build in lightning arrester
Hardware:
Ports: 1 x WAN/LAN
Button: 1 x Reset Button
LED: 1 x Power, 1x WAN/LAN, 1 x WiFi, 3 x Signal
Chipset: MT7688A + 7610E
Flash: 64MB
DDR2: 512MB
Power Supply: DC 24V/0.5A Power over Ethernet (Passive PoE)
Power Consumption: 7W MAX
Rated Voltage/Frequency: input: 100-240V, 50/60Hz

Wireless:
Standard: IEE 802.11b/g/n/a/ac
Frequency Band: 2.4GHz, 5GHz
Transmit Power: 30DBm MAX
Sensitivity: 802.11b: -93dBm / 802.11g: -73dBm / 802.11n: -68dBm
Wireless Security: WPA-PSK / WPA2-PSK encryption
Antennas: 2 x 7dBi Detachable Omni Directional
Distance: Outdoor 500m, Indoor 150m (According to the actual environment change)

Environmental:
Operating Temperature: -30℃ to 70℃ (-22 to 158℉)
Storage Temperature: -40℃ to 70℃ (-40 to 158℉)
Relative Humidity (Operational): 10%~90%, noncondensing
Relative Humidity (Storage): 10%~90%, noncondensing

Package Content:
1 x WiFi AP
2 x Omni Antenna
1 x RJ-45 Networking Cable
1 x Power Adapter
1 x POE Converter
1 x Main Body Holder
2 x Cable Ties
1 x Screw Fittings
1 x Quick Installation

Use all three of these components above together to boost and share a Wi-Fi signal. Simply connect your computer to the R36A via ethernet cable for a one-time configuration and setup. Connect the AOA-2409TF antenna to the Tube-U(N) receiver, then connect the Tube-U(N) to the USB port on the R36. Using Wi-Fi scanning software built-into the R36 that you will see during the setup wizard, you can scan for and connect to available wireless networks in your area. Once the R36 has connected to a network, you will be prompted to name and password protect your own new local Wi-Fi network, offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.

Keep mobile devices, media players, and computers connected to Wi-Fi and nationwide 4G LTE networks while traveling in your RV with the Winegard ConnecT 2.0 4G2. Stream live TV and gaming services, access route navigation, and connect computers at maximum available speeds wherever the road may take you. It’s all housed in a rugged, low-profile dome that’s easy to install on your RV’s roof.

The ConnecT 2.0 4G2 provides consistent nationwide 4G LTE, in-motion cellular connectivity for when Wi-Fi networks aren’t available.

Get the data you need with no annual contracts via Winegard prepaid data plans (ranging from 1 GB to 20 GB) that give you the freedom and flexibility to choose what’s right for you. The ConnecT 2.0 4G2 can also connect to AT&T and Verizon cellular networks (Mini-SIM card required), and it offers the capability to swap SIM cards to add to new or existing data plans from other carriers.

The high-performance ConnecT 2.0 4G2 also works as a Wi-Fi extender, offering maximum security while capturing available Wi-Fi signals for a consistent, reliable, and secure mobile internet connection at the fastest speed possible.

More powerful than a smartphone or hotspot device, the ConnecT 2.0 4G2 makes it easy to connect to accessible Wi-Fi hotspots, such as at RV parks, camping sites, restaurants, coffee shops, truck stops, and more — expanding your Wi-Fi coverage inside your RV from farther away.

Easy to set up, simply follow the step-by-step onscreen instructions, scan for and select a Wi-Fi network, and then connect your mobile devices, computers, smart TVs, gaming controls, and more to secure Wi-Fi in seconds. It’s also great for using Wi-Fi Calling and VoIP services to make phone calls when cell coverage is weak.

Always secure, the ConnecT 2.0 4G2 offers advanced Wi-Fi protected access (WPA and WPA2-PSK), double Firewall protection (SPI and NAT), denial of service (DoS) attack prevention, plus a separate guest network access option.

The ConnecT 2.0 4G2 installs on the roof of your RV with included mounting hardware and a 20-foot power cable. The unit measures 16 inches in diameter and 8 inches tall. Designed and manufactured in the USA, it’s backed by a 2-year manufacturer’s limited warranty on parts and 1-year warranty on labor.

Winegard is a leading US designer and manufacturer of more than 1,000 different world class antenna products for the home, RVs, trucking industry, boating, and tailgating parties — including antennas for TV, direct to home satellite services, 4G LTE cellular, and Wi-Fi networks.

The HAO15SIP Hi-Gain Outdoor 15dBi Omni-Directional Antenna Kit is a heavy-duty, weather proof, high powered antenna for extending the range of your 802.11b and 802.11g Wi-Fi devices. The power rating of Wi-Fi antennas is measured in terms of decibels (dBi). The HAO15SIP boosts the antenna power of standard antennas from a minimal 2dBi to a staggering 15dBi. This results in extended wireless distances of up to 2 miles. Whether extending the wireless network from one corporate building to another, or simply from the front house to the back house, the Outdoor Antenna provide wireless users with a high powered solution to extend their wireless network.

Don’t Let the Poor Internet Destroy Your Enjoyment
Wavlink WiFi Extender can help you to improve and boost the existing WiFi for a large area, but few customers have lacked a good understanding on the product use, so pls kindly note the following points before use. Don’t Let the Poor Internet Destroy Your Enjoyment!

Pay Much Attention to AP Mode for Outdoor Use
For outdoor use in a large area, we strongly advise you’d better select a most suitable mode “Access Point” (not “Repeater”) to set it up, then you should use a max 60m cat. 5e ethernet cable (need to buy it from your local shop) to connect the PoE converter and this AP unit (First of all, pls use our offering 1-meter RJ45 cable to connect your router and PoE converter).

Pls note – This AP or repeater is suitable used for the same horizontal direction, not vertical direction (Only Mesh can work for vertical direction). And, its default IP can’t be changed by anybody.

To enjoy a fluent and high speed continuously at networking, you are kindly required resetting the power cycle to clear data after one-week use, then get it back working again.

If relevant – You can’t power it up in your current system, pls do contact us via Amazon emails for downloading the latest firmware.

To use this item better, pls download Technical Specification (RoHs, CE, User Manual, Spec Sheet) at bottom by yourself, then review it very carefully.

THE NEXT GENERATION OF WI-FI, LEADING 802.11AC STANDARD

Strong Power for Multiple Outdoor Applications
WN572HG3 is designed for outdoor “Access Point” or indoor “Wireless Repeater” network, making it an ideal solution for the big area, such as factory, community, street, or big house etc.

Specifications:
1. Ports: 1 x 10/100/1000M WAN (work with Cat 6A cable) , 1 x 10/100M LAN
2. Buttons: 1 x Reset button
3. LED: 1 x Power, 1 x WAN, 1 x LAN, 1 x WiFI, 3 x Signal
4. Power Supply: DC24V / 0.5A Power over Ethernet (Passive PoE)
5. Rated Voltage / Frequency: input:100-240 Va.c. 50/60Hz

SPECIAL ATTENTION TO OUTDOOR USE:
To get a max and stable speed, you’d better select a most suitable mode “Access Point” (not “Repeater”) for outdoor use, and using an Ethernet cat 6A cable (Max 60m) to connect your router and this AP through the PoE converter.

For Installation Instructions – Pls first follow up with the paper document “QUICK START GUIDE” step by step, if it could be difficult for some clients to understand, pls go for “installation video” at www.youtube.com/c/wavlinkofficial. You can also contact us via [email protected] for any tech support.

If relevant “Doesn’t turn on or does not properly power up.”
-Firmware contains fixes for bugs and new features, but the clients could not always keep the firmware be latest, so pls contact us via Amazon mail box for getting the latest firmware once needed.

To use this item better, pls download Technical Specification (e.g. Specification Sheet, Installation Manual, Certificates, Data sheet) at bottom directly, and review it very carefully by yourself.

The Alfa WiFi Camp Pro 2 Mini works just like the full size Alfa WiFi Camp Pro 2, but with smaller pieces designed for indoor use or smaller spaces. It includes the same R36A USB Wi-Fi router that is in the Alfa WiFi Camp Pro 2, but instead of the larger outdoor USB tube and antenna, it includes an indoor USB receiver and smaller 5 dBi antenna. The perfect way to get a range boost where the original Alfa WiFi Camp Pro 2 may be too big. Use inside RVs near a window if you don’t want to mount an outdoor antenna on the outside of the RV. Use on small covered decks at apartment complexes where the HOA rules may prohibit the installation of larger outdoor WiFi antennas. Or take it with you in a laptop travel bag and use in a hotel or on the road. The Alfa WiFi Camp Pro 2 Mini includes: -Alfa R36A USB WiFi router + 5 dBi antenna -Alfa AWUS036NH indoor USB Wi-Fi receiver + 5 dBi antenna -10 ft USB cable to go between R36A and AWUS036NH -U-mount holder for AWUS036NH with suction cup and clip attachment (suction cup to a window)* -wall AC power supply -Ethernet cable This is a special kit shipping in one retail box that features all of the above equipment designed to pick up a weak Wi-Fi signal and repeat it as your own personal hotspot. This is ideal for use on boats, RVs and campers, or larger properties. Place the R36A router indoors near a power outlet. Place the AWUS036NH about 10 feet away from the R36A using included USB cable to get it in a more optimal area for reception. Connect your PC or device to the R36A’s WiFi signal and go through configuration to pick out the network you are extending and enter the password. Now the original WiFi signal will be repeated around you as your own personal hotspot all of your devices can use.

With the travel-sized and compact design, TL-WR902AC is small enough to put into your pocket and make sure you can have internet access wherever you go. The mini USB power supply and built-in adapter make it perfect for travelers, students, and anyone else living life on the go. Coming with the next generation Wi-Fi standard – 802.11ac, 3 times faster than wireless N speeds, TL-WR902AC delivers a combined wireless data transfer rate of up to 733Mbps, making it an ideal choice for various applications simultaneously. To meet the wireless needs of almost any situation you might encounter, the TL-WR902AC features Router, Hotspot, Range Extender, Client, and Access Point Modes. A multifunctional USB port allows you to share files and media through your internet browser with different computers. Also, the USB port can provide power supply (up to 5V/2A) to mobile devices like smart phones or tablets, making it easy to charge on the go.