The Best 12 Shark Bite Caps

Product Description

Cap off pipe in seconds with the SharkBite Push-to-Connect 1/2-Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite End Cap is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

From the Manufacturer

SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.

XFITTING – The Push-Fit connection system it’s the easiest and fastest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Just push connect by hands, within 1 minutes to finish installation, makes our life more efficient, fast, save time and strength and your money. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get a grip on your next plumbing project. · Instant Push-Fit connection for increased ease-of-use. · No soldering, clamps, unions, or glue required. · Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination. · Integral tube liner for PEX installations, so no loose components, ensures secure, reliable connection.

Cap off pipe in seconds with the SharkBite Push-to-Connect 1/2-Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the SharkBite disconnect tool. The SharkBite End Cap is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.

SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

Push lock is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, pipe together. It features easy to disconnect and reconfigure the system with no soldering, clamps, unions or glue required, Its as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring, Coupling is removable and reusable installation. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is rated up to 200 psi and 200°Fahrenheit.

“

Dual Compression Angle Stop
The SharkBite double stop angle supply valve controls water flow to household plumbing fixtures and allows two 3/8” outlet supply lines to be attached to a single supply valve. Designed for running two supply lines such as a dishwasher and kitchen faucet or dual vanity sink. The Angle Stop Valve is used where the water pipe enters the room to allow for easy water shut-off of to the end fixture allowing for maintenance and repair without having to turn water off to your entire home.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

“

SharkBite PVC cap is the most efficient PVC pipe cap due to its push-to-connect design. These PVC pipe plugs make a great pipe plug for stub outs and pressure testing a home or PVC water line as they take no time to cure after installation.

CUT. PUSH. DONE. Cap off pipes in seconds with the SharkBite Push-to-Connect 1/2 Inch End Cap. This plumbing fitting caps copper, PEX, CPVC, HDPE, or PE-RT pipe. With no soldering, clamps, or glue required, capping is as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless-steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

CUT. PUSH. DONE. When lower material cost is desired, the SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems. The PEX/Barb Connection System includes fittings, manifolds, valves, clamp rings, crimp rings and tools. Can be used with either SharkBite Clamp Rings or SharkBite Crimp Rings. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting’s stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. No soldering, no clamps, no glue. SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.

Product Description

“

SharkBite Deburr & Depth Gauge Tool

Our 2-in-1 tool is designed to simplify your plumbing project when using copper or CPVC tubing. Use it to remove burrs from copper pipe or CPVC pipe and to mark correct insertion depth for SharkBite fittings. The mark is used to confirm that the fitting is seated correctly to ensure a watertight connection.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. No soldering, clamps, glue required. It’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. The Shark Bite PEX tubing cutters are an integral tool in the easy-to-install SharkBite Connection System.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

“

From the Manufacturer

The Cash Acme U702A Shark Bite Deburring and Depth Tool is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.